IC693CMM321
|
IC693CMM Modbus Ethernet Interface Transmit Data (TD) and Receive Data (RD) 9030 |
IC693DNM200
|
DeviceNet Master Module allows a PACSystems RX3i to send and receive I/O data IC693DNM |
IC693DNS201
|
DeviceNet Slave Module support Get and Set PLC Registers IC693DN IC693DNS Slave Module |
IC693NIU004
|
ETHERNET NETWORK INTERFACE GE Fanuc Series 90-30 NIU004 ModuleIC693NI IC693NIU |
IC693PBM200
|
Siemens Profibus DP Master Module PBM200 Series 90-30 Module Profi IC693PB IC693PBM |
IC693PBS201
|
Siemens Profibus DP Slave Module PBS201 Module Series 90-30 Profi Bus IC693PB IC693PBS |
IC693PCM300
|
Programmable Coprocessor Module (PCM) 160 KB PCM300 Series 90-30 IC693P IC693PC |
IC693PCM301
|
IC693PCM PCM 192 KB Programmable Coprocessor Module (PCM) 301 IC693P IC693PC |
IC693PCM311
|
PCM Programmable Coprocessor Module (PCM) 311 Series 90-30 640 KB IC693P IC693PC |
IC693PIF300
|
INTERFACE MODULE Compatable with GE Fanuc Series 90-30 PLC PIF300 IC693P IC693PI |
IC693CPU311
|
5-slot baseplate with embedded CPU, 1K Byte Register Memory use small fraction 9030 |
IC693CPU313
|
5-slot baseplate with embedded CPU, 2K Bytes Register MemoryFirmware for CPUs 9030 |
IC693CPU321
|
10 SLOT CPU RACK Configuring a model 331 rack size will produce Non-fatal hardware IC6 |
IC693CPU323
|
10-Slot Rack With Turbo CPU in base Firmware for these CPUs is in a replaceable EPROM IC |
IC693CPU331
|
CPU (16K Bytes) 10 MHz modular CPUs consist of a CPU, memory IC693CPU Compatable |
IC693CPU340
|
PROCESSOR CPU 80C188XL microprocessor 20 MHz, 32K Bytes User Program IC693CPU 9030 |
IC693CPU341
|
CPU341 module PROCESSOR 20 MHz, 80K Bytes User Program Memory IC693CPU GE Fanuc |
IC693CPU350
|
CPU 350 25 MHz Complimentary Metal-Oxide Semiconductor Random Access Memory |
IC693CPU351
|
CPU 351 Flash Firmware (Standard and User Memory) 25 MHz IC693CPU Compatabe with |
IC693CPU352
|
CPU 352 Capacities Speed: 25 Processor: 80386EX 25 MHz, math coprocessor IC693CPU |
IC693CPU360
|
CPU 360 Memory: 240K1 Confirgurable All Series CPUs can work with integer numbers |
IC693CPU363
|
CPU 363 CPU module, 25 MHz, with two extra serial ports 90-30 State Logic CPU IC693CPU |
IC693CPU364
|
CPU 364 and Ethernet Interface communicate without using the PLC backplane IC693CPU |
IC693CPU367
|
CPU 367 Module with PROFIBUS Slave Firmware 90-30 Embedded Interface Series 90-30 CPU |
IC693CPU370
|
GE CPU Ethernet CPU firmware stored in Flash memory loaded serial port connector IC693CPU |