Búa tác động Model : 086C03 | ICP Impact Hammer
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±15 %) | 10 mV/lbf | 2.25 mV/N | |
Measurement Range | ±500 lbf pk | ±2224 N pk | |
Resonant Frequency | ≥22 kHz | ≥22 kHz | |
Non-Linearity | ≤1 % | ≤1 % | |
ELECTRICAL | |||
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | <100 Ohm | <100 Ohm | [ 1] |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Discharge Time Constant | ≥2000 sec | ≥2000 sec | [ 1] |
PHYSICAL | |||
Sensing Element | Quartz | Quartz | |
Sealing | Epoxy | Epoxy | |
Hammer Mass | 0.34 lb | 0.16 kg | |
Head Diameter | 0.62 in | 1.57 cm | |
Tip Diameter | 0.25 in | 0.63 cm | |
Hammer Length | 8.5 in | 21.6 cm | |
Electrical Connection Position | Bottom of Handle | Bottom of Handle | |
Extender Mass Weight | 2.6 oz | 75 gm | |
Electrical Connector | BNC Jack | BNC Jack |
* All specifications are at room temperature unless otherwise specified
.
[ 1] Typical.
[ 2] See PCB Declaration of Conformance PS068 for details.
Supplied | ||
084A08 | Extender - steel, 0.6" dia. (for Models 086C01 through 086C04) | 1 |
084B03 | Hammer Tip - steel insert (hard) (for Models 086C01, C02, C03, C04, D05) | 1 |
084B04 | Hammer Tip - plastic insert, white (medium) (for models 086C01, C02, C03, C04, D05) | 1 |
HCS-2 | Calibration of Series 086B to 086D instrumented hammers only | 1 |
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 2 |
084C05 | Tip - rubber insert in aluminum, black (soft) (for Models 086C01 through 086C05) | 2 |
084C11 | Tip - rubber insert in aluminum, red (supersoft) (for Models 086C01 through 086C04) | 2 |
085A10 | Plastic protective cap (for hammer tip) | 2 |
( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
( TLD ) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4