Cảm biến gia tốc Accelerometer TLD333B30 TLD333B32 PCB
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | |
Measurement Range | ±50 g pk | ±490 m/s² pk | |
Frequency Range (±5 %) | 0.5 to 3000 Hz | 0.5 to 3000 Hz | |
Resonant Frequency | ≥40 kHz | ≥40 kHz | |
Phase Response (±5 °) (at 70°F [21°C]) | 2 to 3000 Hz | 2 to 3000 Hz | |
Broadband Resolution (1) | 0.00015 g rms | 0.0015 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | [3] |
ENVIRONMENTAL | |||
Overload Limit (Shock) | ±5000 g pk | ±49000 m/s² pk | |
Temperature Range (Operating) | 0 to +150 °F | -18 to +66 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | |
Base Strain Sensitivity | 0.01 g/µε | 0.1 (m/s²)/µε | [2] |
ELECTRICAL | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤300 Ohm | ≤300 Ohm | |
Output Bias Voltage | 7 to 12 VDC | 7 to 12 VDC | |
Discharge Time Constant | 1.0 to 3.0 sec | 1.0 to 3.0 sec | |
Settling Time (within 10% of bias) | <12 sec | <12 sec | |
Spectral Noise (1 Hz) | 39 µg/√Hz | 380 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 11 µg/√Hz | 110 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 3.4 µg/√Hz | 33 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 1.4 µg/√Hz | 14 (µm/sec2)/√Hz | [2] |
PHYSICAL | |||
Size - Height | 0.40 in | 10.2 mm | |
Size - Length | 0.63 in | 16.0 mm | |
Size - Width | 0.40 in | 10.2 mm | |
Weight | 0.14 oz | 4.0 gm | [2] |
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 5-40 Female | 5-40 Female | |
Mounting Torque | 4 to 5 in-lb | 45 to 56 N-cm |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
080A25 | Adhesive base, 0.438" hex, 5-40 tapped hole, aluminum hardcoat (for Series 333B30/B40/B50) | 1 |
080A90 | Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) | 1 |
081A27 | Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu | 1 |
ACS-1 | Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable | 1 |
M081A27 | Metric mtg stud, 5-40 to M3 x 0.50 long | 1 |
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.5 to 13 VDC |
(TLA) TEDS LMS International - Free Format
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.5 to 13 VDC |
(TLB) TEDS LMS International - Automotive Format
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.5 to 13 VDC |
(TLC) TEDS LMS International - Aeronautical Format
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.5 to 13 VDC |