Cảm biến gia tốc Accelerometer TLD393B04 TLD393B05 PCB
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±10 %) | 1000 mV/g | 102 mV/(m/s²) | |
Measurement Range | ±5 g pk | ±49 m/s² pk | |
Frequency Range (±5 %) | 0.06 to 450 Hz | 0.06 to 450 Hz | |
Frequency Range (±10 %) | 0.05 to 750 Hz | 0.05 to 750 Hz | |
Frequency Range (±3 dB) | 0.02 to 1700 Hz | 0.02 to 1700 Hz | |
Resonant Frequency | ≥2500 Hz | ≥2500 Hz | |
Broadband Resolution (1) | 0.000003 g rms | 0.00003 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | [3] |
ENVIRONMENTAL | |||
Overload Limit (Shock) | ±300 g pk | ±2950 m/s² pk | |
Temperature Range | -15 to +176 °F | -26 to +80 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | |
Base Strain Sensitivity | ≤0.0005 g/µε | ≤0.005 (m/s²)/µε | [2] |
ELECTRICAL | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 10 mA | 2 to 10 mA | |
Output Impedance | <500 Ohm | <500 Ohm | |
Output Bias Voltage | 7 to 12 VDC | 7 to 12 VDC | |
Discharge Time Constant | 5 to 15 sec | 5 to 15 sec | |
Settling Time | <100 sec | <100 sec | |
Spectral Noise (1 Hz) | 0.30 µg/√Hz | 2.9 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 0.10 µg/√Hz | 1.0 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 0.04 µg/√Hz | 0.4 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 0.04 µg/√Hz | 0.4 (µm/sec2)/√Hz | [2] |
PHYSICAL | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Flexural | Flexural | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Diameter | 0.99 in | 25 mm | |
Size - Height | 1.28 in | 32.5 mm | |
Weight | 1.8 oz | 50 gm | [2] |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Top | Top | |
Mounting Thread | 10-32 Female | 10-32 Female |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
085A41 | Thermal boot for 393B04 and 393B05, Black Santoprene | 1 |
ACS-1 | Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable | 1 |
ACS-4 | Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz, (requires ACS-1 and minimum sensitivity of 20 mV/g) | 1 |
M081B05 | Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu | 1 |
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.5 to 13 VDC | 7.5 to 13 |
Excitation Voltage | 20 to 30 VDC | 20 to 30 |
(TLA) TEDS LMS International - Free Format
ENGLISH | SI | |
---|---|---|
Excitation Voltage | 20 to 30 VDC | 20 to 30 |
Output Bias Voltage | 7.5 to 13 VDC | 7.5 to 13 |
(TLB) TEDS LMS International - Automotive Format
ENGLISH | SI | |
---|---|---|
Excitation Voltage | 20 to 30 VDC | 20 to 30 |
Output Bias Voltage | 7.5 to 13 VDC | 7.5 to 13 |
(TLC) TEDS LMS International - Aeronautical Format
ENGLISH | SI | |
---|---|---|
Excitation Voltage | 20 to 30 VDC | 7.5 to 13 |
Output Bias Voltage | 7.5 to 13 VDC | 7.5 to 13 |
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
ENGLISH | SI | |
---|---|---|
Excitation Voltage | 20 to 30 VDC | |
Output Bias Voltage | 7.5 to 13 VDC |
(W) Water Resistant Cable
ENGLISH | SI | |
---|---|---|
Electrical Connector | Sealed Integral Cable | |
Electrical Connection Position | Top |