Models 60-12C, F, G and ENC Speed Sensors must be attached to a pulley shaft which turns at true conveyor belt speed. Normally, the tail pulley shaft or a snubbing roll shaft satisfies this requirement. In installations where the tail pulley or snubbing roll shaft is not accessible, an additional pulley must be installed specifically for the speed sensor.

• 60-12C is used for speeds from 20 to 200 RPM and supplies the output of the generator directly to the totalizer for high speed operation
• 60-12F is used for speeds from 3 to 30 RPM
• 60-12G is used for speeds from 10 to 200 RPM
• 60-12ENC is used for speeds 0 to 200 RPM and has a 500 pulse per revolution encoder inside, typically is used on slow RPM applications

Product Specifications:

Type: Digital, brushless

Mounting: Direct to 15.88 mm (0.625 in) diameter stub shaft on tail pulley, bend pulley, or return roll

Housing: Weather-tight, epoxy finish, cast aluminum

Mounting Hardware: Supplied with coupling, restraint arm and restraint spring

Shipping Weight: 3.6 kg (8 lb)

Robust industrial design for the most demanding applications