Cảm biến tốc độ Dynalco SST2400H-1, Dynalco SST2400H-1, Dynalco, SST2400H-1

•  Proportionaloutputsofeither4–20mA(standard), 0–5 Vdc, or 0–10 Vdc are field- selectable.Standard 0-1 mAdc meter output included.

•  Models available with up to four alarm setpoints.

•  Field-selectablefrequencyrange.

•  Field-adjustablesensitivitycontrol.

•  Field-programmableformanytypesofsensors, including contact closure input.

•  Repeateroutputdrivescountersandself-powered digital tachometers such as Dynalco’s SPD-100 and SPD-700.

•  Regulated 14 Vdc output powers active pickups (e.g. M910), accessories, and digital meters such as DPM-105 or MTH-103D, and the 12 Vdc versions of the internally lighted SPD-100L and LST-100L.

•  Alarmsarefield-configurableforDPDT (SST-2400 A or -H only), overspeed,underspeed, energize, de-energize, latch, auto-reset.

•  Integral VERIFY, requires external meter. Permits viewing and setting of setpoint value without actuating the relays.

•  Input Frequency: Full-scale values from 0–0.1Hz (6 pulses per minute) to 0–50,000 Hz.

•  Function:Convertsfrequencyinput(speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.

•  Applications: Includes engines, machines, I/P drivers, instrumentation, process control, recording, measurement.

•  Signal Sources: Includes magnetic pickups, ac generators, contact closures, photocells.

•  Output Range Capability: Current source up to 50 mAdc output always included.

•  Alarm Setpoints: Available with two or four relays. Also available with no relays if only proportional outputs are required.