Loa thông báo E2S GNEXS1FDC024AB1A1R E2S GNExS1F Alarm Horn Sounder
0944911836 Ms. Duyên
0972835740 Ms. Hà
0385097045 Mr. Hiếu
0392468875 Ms. Anh
0707602728 Ms. Vân
Loa thông báo E2S GNEXS1FDC024AB1A1R E2S GNExS1F Alarm Horn Sounder
The GNExS1F is an IECEx and ATEX certified alarm horn sounder featuring a re-entrant flare horn. The robust GRP (glass reinforced polyester) enclosure is approved for Zone 1 & Zone 2 explosion proof signalling applications.
-
E2S GNEXS1FDC024AB1A1R
-
Liên hệ
-
31
- Thông tin sản phẩm
- Bình luận
Loa thông báo E2S GNEXS1FDC024AB1A1R E2S GNExS1F Alarm Horn Sounder
Description
Featuring 64 alarm tone sounds, each of the available 4 stage/channels can be remotely triggered. Class D amplification provides a high sound output at optimum an operating current. The threaded flameproof joint, multiple cable entries and duplicated, pluggable termination simplifies both installation and routine maintenance. SIL1 & SIL2 Route 2H compliant to IEC61508 (2010) as standard, with optional diagnostic module for Route 1H SIL2 compliance.
Specification
| Maximum output: | 115dB(A) @ 1 m +/- 3dB [106dB(A) @ 10ft/3m +/- 3dB] |
| Nominal output: | 110dB(A) @ 1m +/- 3dB [101dB(A) @ 10ft/3m] +/- 3dB |
| No. of tones: | 64 (UKOOA / PFEER compliant) |
| No. of stages: | 4 |
| Volume control: | Full range |
| Effective range: | 125m/410ft @ 1KHz |
| Voltages DC: | 24Vdc (10-30Vdc), 48vdc (38-60Vdc) |
| Voltages AC: | 230Vac (100-260Vac) |
| In-rush: | 815mA within 4ms @ 24Vdc |
| Stage switching: | DC units: positive or negative AC units: common supply line |
| Safety Integrity Level: | Product version A: SIL1 and SIL2 Route 2H Product version S: SIL2 Route 1H with diagnostics SFF: >99% See install manual for reliability & functional safety data |
| Ingress protection: | EN60529: IP66 |
| Enclosure material: | UV stable GRP (glass reinforced polyester) |
| Enclosure colour: | Natural Red |
| Enclosure finish: | Natural – can be painted in alternative colours |
| Cable entries: | 2 x M20x1.5mm Stopping plug included |
| Stopping plugs: | Brass, Nickel Plated or Stainless Steel |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) Pluggable & duplicated terminals |
| Line monitoring: | Diode polarized for use in supervised circuits Blocking diode for reverse polarity monitoring |
| Ground/Earth stud: | M4 |
| Line monitoring: | Blocking diode included EOL Min. 500 Ohm 2W, or 3k3 Ohm 0.5W resistor or diode (DC versions) can be fitted |
| Enclosure volume: | <2 litres |
| Installation temp: | -50° to +70°C (-58°F to +158°F) |
| Storage temp: | -50° to +70°C (-58°F to +158°F) |
| Relative humidity: | 99% |
| MTBF DC: | 93.92 years / 822,706 hours – MIL 217 |
| MTBF AC: | 46.66 years / 408,508 hours – MIL 217 |
| Weight: | DC: 3.00kg/6.6Ibs AC: 3.20kg/7.04Ibs |
Part Codes
| Part Code: | Identifier: | Description: |
|---|---|---|
| Product type: | GNExS1 | GNExS1 alarm horn sounder |
| Horn type: | F | Flare re-entrant horn |
| Voltage: | DC024 DC048 AC230 |
10-30Vdc 38-60Vdc 100-260Vac |
| Cable entries:[e] | A B C D E F G |
2 x M20x1.5mm 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor |
| Stopping plug/ adaptor material: [m] |
B N S |
Brass Nickel plated brass Stainless steel |
| Bracket material: [s] | 1 3 5 |
A4 316 Stainless Steel A4 316 St/St with Equip. Tag A4 316 St/St with Equip. Tag and Duty Label |
| Product version: [v] | A S T |
IECEx, ATEX, Ex EAC, INMETRO SIL1 & SIL2 Route 2H IECEx, ATEX, Ex EAC, INMETRO SIL2 Route 1H with diagnostics SFF: >99% IECEx, ATEX, Ex EAC, INMETRO – Telephone/Relay initiate |
| Product option: [o] | 1 Z X Y K V R |
Standard product Custom alarm tone software – contact E2S Custom configuration – contact E2S Stage control Config. 4 Stage control Config. 5 (DC) and Config. 2 (AC) Stage control Config. 6 Reverse polarity stage control (DC) Config. 7 |
| Enclosure colour: [x] | R S |
Red Special – contact E2S for alternative enclosure colours |
| Accessories: | ||
| SP65-0001-A4 SP65-0003-A4 |
Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316) |
| Alarm stage control: | ||
|---|---|---|
| Please review the installation manual and wiring schematics for remote stage control and EOL resistor monitoring configuration options: | ||
| Config. 1 [DC]: | Factory default. Common negative, positive switching. Up to 4 Alarm Stages. EOL monitoring Alarm Stage 1 only | |
| Config. 2 [DC]: | User setting. Common positive, negative switching. Up to 4 Alarm Stages. EOL monitoring Alarm Stage 1 only | |
| Config. 3 [DC]: | User setting. Common negative, positive switching activation of Alarm Stages 1 & 2 with EOL on both stages. Reverse polarity monitoring | |
| Config. 4 [DC]: | Product option ‘Y’. Independent activation of Alarm Stages 1 & 2 with EOL on both stages. Forward polarity monitoring | |
| Config. 5 [DC]: | Product option ‘K’. Horn continuously powered. Voltage free activation of up to 3 alarm stages | |
| Config. 6 [DC]: | Product option ‘V’. Independent activation of up to 4 Alarm Stages with EOL on all stages. Forward polarity monitoring | |
| Config. 7 [DC]: | Product option ‘R’. Reverse polarity selection of Stage 1 and Stage 2 | |
| Config. 1 [AC]: | Factory default. Up to 4 Alarm Stages. Stage 1 activated at power on. Stages 2, 3 and 4 via volt free contacts | |
| Config. 2 [AC]: | Product option ‘K’. Horn continuously powered. Voltage free activation of up to 3 alarm stages | |
Sản phẩm cùng loại
Thông tin liên hệ
CÔNG TY TNHH GIẢI PHÁP TỰ ĐỘNG HÓA SAS
Mã số thuế: 0315763284
Địa chỉ: 409/48 Nguyễn Oanh, Phường 17, Quận Gò Vấp, TP Hồ Chí Minh,Việt Nam. 
Xem bản đồ
Tên giao dịch: SAS AUTOMATION SOLUTIONS COMPANY LIMITED
Tên viết tắt: SAS AUTOMATION CO., LTD
Tag seo
Copyright © 2020 your name Designed by:Nina Co.,Ltd
online: 147
Trong tháng: 10000
Tổng truy cập: 3987752
