Máy đo gió siêu âm Ultrasonic Anemometer 1D 4.3866.0x.xxx Thies CLima
4.3865.0x.xxx
The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow
of a fixed flow direction and the acoustic-virtual temperature.
The device has 5 m fix cable
Heated components:
• sensor arms
4.3866.0x.xxx
The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow
of a fixed flow direction and the acoustic-virtual temperature.
The device has a 8-pol. plug connector
Heated components:
• sensor arms
4.3867.0x.xxx
The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow
of a fixed flow direction and the acoustic-virtual temperature.
The device has a 8-pol. plug connector and is mounted on a mast tube.
Heated components:
• sensor arms
4.382x.0x.xxx
The Ultrasonic Anemometer 2D serves for the 2-dimensional acquisition of the horizontal components of the wind velocity, the wind direction as well as of the acoustic-virtual temperature.
Heated components:
• sensor arms
4.382x.3x.xxx
The Ultrasonic Anemometer 2D serves for the 2-dimensional acquisition of the horizontal components of the wind velocity, the wind direction as well as of the acoustic-virtual temperature.
Heated components:
• sensor arms
• ultrasonic transducers
4.382x.4x.xxx
The Ultrasonic Anemometer 2D serves for the 2-dimensional acquisition of the horizontal components of the wind velocity, the wind direction as well as of the acoustic-virtual temperature.
The model no. 4.3820.4x.xxx is equipped with an additional case heating (supply:
48 V AC/DC, 280 W ) for the use at extremely critical sites, where frequent icing might be expected
Heated components:
• sensor arms
• ultrasonic transducers
• housing
4.383x.2x.xxx
The Ultrasonic Anemometer 3D serves for the 3-dimensional acquisition of the horizontal and vertical components of the wind velocity, the wind direction as well as of the acoustic-virtual temperature.
Heated components:
• sensor arms
• ultrasonic transducers
4.383x.4x.xxx
The Ultrasonic Anemometer 3D serves for the 3-dimensional acquisition of the horizontal and vertical components of the wind velocity, the wind direction as well as of the acoustic-virtual temperature.
The model no 4.3830.4x.xxx is equipped with an additional case heating (supply: 48
V AC/DC, 360 W) for the use at extremely critical sites, where frequent icing might be expected.
Heated components:
• sensor arms
• ultrasonic transducers
• housing
4.3875.xx.xxx
The Ultrasonic Anemometer compact serves for the 2-dimensional acquisition of
the horizontal components of the wind velocity, the wind direction and the acoustic-virtual temperature.
Heated components:
• base plate
• cover plate
• sensor receiving sockets
• ultrasonic transducers
4.3875.6x.xxx
The Ultrasonic Anemometer compact serves for the 2-dimensional acquisition of
the horizontal components of the wind velocity, the wind direction and the acoustic-virtual temperature.
• Heater with 48V DC supply for increased icing resistance
Heated components:
• base plate
• cover plate
• sensor receiving sockets
• ultrasonic transducers
4.3877.xx.xxx
The Ultrasonic Anemometer compact serves for the 2-dimensional acquisition of
the horizontal components of the wind velocity, the wind direction, the air pressure and the acoustic-virtual temperature.
• Ethernet
• PROFINET / PROFIsafe
• Predictive Maintenance Indicator
• Heater with 48V DC supply for increased icing resistance
Heated components:
• base plate
• cover plate
• sensor receiving sockets
• ultrasonic transducers
4.920x.x0.00x
The CLIMA SENSOR US serves for the measurement of environmental parameters. These are available for further processing as
• Serial telegram via an RS485/422
and /or as
• Analogue signals via voltage outputs
4.921x.x0.00x
The CLIMA SENSOR US serves for the measurement of environmental parameters. These are available for further processing as
• Serial telegram via an RS485/422
and /or as
• Analogue signals via voltage outputs
Heated components:
• Housing
• Ultrasonic transducers