Máy đo tốc độ vòng quay T77630-10 | AI-Tek Instruments | TACHTROL 10 and 30 Dual Input Digital Tachometer

0944911836 Ms. Duyên 0972835740 Ms. Hà 0385097045 Mr. Hiếu 0392468875 Ms. Anh 0707602728 Ms. Vân
Máy đo tốc độ vòng quay T77630-10 | AI-Tek Instruments | TACHTROL 10 and 30 Dual Input Digital Tachometer

Máy đo tốc độ vòng quay T77630-10 | AI-Tek Instruments | TACHTROL 10 and 30 Dual Input Digital Tachometer

Product Specifications

Analog Output

Ranges: 0 to 20mA, 4 to 20mA, -20 to 0 to +20mA; user selectable

Accuracy: Internal instrument accuracy: ±.005%;plus ±.05% of full scale range at room temp with 400 ohm load; ±0.1% over temp range and load range. Unit is factory calibrated. Can be re-calibrated using TACHLINK.

Resolution: Step size: 610 nanoamps per lbs. 16 bit D/A

Linearity: ±0.02% typical

Loop Impedance: 100-1000 ohms

Reponse Time: Input to output 6.55 msec+ 1 msec settle at 1kohms (worst case) to .1% of final value

Electrical Isolation: 500 Vrms continuous
  • T77630-10 | AI-Tek I
  • Liên hệ
  • 1833
  • Thông tin sản phẩm
  • Bình luận

The TACHTROL 30 computing tachometer measures input frequency. This dual channel instrument also converts the resulting quantities to an analog output, utility RS485 communication, 2 solid state and 2 mechanical relay functions.

The TACHTROL 30 and TACHTROL 10 accept an extensive range of AC or DC power. These instruments have great accuracy, processing speed, response time and can be used in rate period or counter mode.

Typically, the new TACHTROL 30 or 10 are used with magnetic sensors as a signal source. However, they may receive sine wave or square wave TTL signals from any frequency source including phase-shifted frequencies from bi-directional hall sensors to indicate change in direction.

Included Features

  • Quicker Response Time: 7.6 ms (analog & display), 16.5 ms (mech. relays), 2ms (dig. relays)
  • Higher Level of Accuracy: 0.1% (analog & display), 0.005% (relays)
  • Field Programmable: Using TACHLINK or TACHTROL plus
  • Digital Configuration: Approaches real time
  • Analog Outputs: 0 -20 mA, 4-20 mA, -20 to 0 to +20 mA
  • Relays: (2) Mechanical form C, 6 A @ 277 Vac, (2) solid state Form A 0.4 A @ 60 Vac or DC
  • Digital Display: Accepts (8) TACHTROL plus remote displays
  • Computed Functions: 9
Sản phẩm cùng loại