Máy phân tích độ ẩm chống cháy nổ PhyMetrix ExMa

-110°C to +20°C dewpoint Sensor

Fast, Accurate and Repeatable Moisture Meter

Built-in temperature compensation

optional built-in pressure sensor with compensation

optional 4/20 mA sink or source output with HART

optional RS-485 Modbus interface

3″ viewport, NEMA 4X/IP67 & Explosion-proof

State-of-the-art electronics & software

Advanced User-friendly Interface

Continuous Status and Diagnostics display

On-screen histogram and trend graph

Programmable data logging, clock calendar

Virtual Analyzer PC s/w for training & evaluation

316 Stainless Steel & PTFE wetted parts

Diverse Selection of Inlet Port Fittings

NIST calibrations

Cost Effective Complete On-Line System

Built-in flow regulation, cleanable filter & flow meter

Extractive or Bypass Installation

Thru-the-Glass Touch User Buttons

Approved Explosion-Proof Installations USA, Canada, ATEX

Installation Indoor/Outdoor On-The-Pipe or Panel

Mã sản phẩm:
Giá:
Liên hệ
Lượt xem:
1204

Thông tin sản phẩm
Bình luận

Máy phân tích độ ẩm chống cháy nổ PhyMetrix ExMa, PhyMetrix ExMa, ExMa, PhyMetrix Explosion-Proof Moisture Analyzer, ExMa-S-P-A-I-C, ExMa-S-P-A-R-C, ExMa-S-P-A-R-B, ExMa-S-P-M-A-R-I-C

natural gas dew point meter Sensor	Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint ) Accuracy: ±2°C temperature corrected Repeatability: 0.8°C Response time: 95% of step change in 3 min. Sample flow: >1 LPM
Temperature Sensor	Range: -40°C to +70°C ; Accuracy: ±2°C
Pressure Sensor	2 to 1000 PSIA ±1%, 316L stainless steel wetted parts (higher pressure ranges available)
Electrical	3 automatic detection – self configuring power modes: 1) 90-260VAC 47-440Hz 2) 12-24VDC 10VA 3) Optional 4/20mA Loop Powered Power modes 1 or 2 have the following I/O options: a) RS-422 isolated b) Analog Output 4/20mA sink or source isolated with HART® c) up to 3 Alarm Relays – 3A, 250VAC contacts
Mechanical	3/4″ OD tube and 1/4″ NPTF Inlet, 1/8″ NPTF Outlet All 316 Stainless Steel and PTFE wetted parts, small surface area stainless steel sampling chamber for fast response time. Enclosure Aluminum or optional 316 Stainless Steel, Glass lens, IP66 & IP68 FM/CSA Explosion Proof Certified Class I, Div I, Groups B, C And D Class II, III, Div 1, Groups E, F And G ATEX Explosion Proof Certified ATEX 2 GD, Exd I & IIC; IECEx, Exd I & IIC Dimensions- L: 8.9″ (226mm) W: 5.8″ (147mm) H: 5.8″ (147mm) Weight Total: 5.5 Lbs (2.5 Kg) Pressure: 5000 PSIA (345 Bar) Flow Control Orifice can be placed at Inlet (default) or Outlet; Built in serviceable/cleanable 100 micron Filter
Temperature Range	ExMa Moisture Meter: -20°C to +60°C Electronics: -40°C to +85° Moisture Sensor: -20°C to +60°C Pressure Sensor: -20°C to +85°C LCD operating: -20°C to +70°C storage: -30°C to +80°C
Miscellaneous Features	Through the glass user interface buttons, allow operation while enclosure is closed NIST traceable calibrations Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H₂O vapor pressure, grams of H₂O / m³, Lbs H₂O /10⁶ standard cubic feet in Natural Gas. (All units auto-scaled) Virtual Analyzer PC software for training and evaluation, allows the user to experience the exact interface on their own PC with voice explanations