Thiết bị cảnh báo E2S SONFL1XAC230R/R SONFL1X Alarm Horn & Xenon Strobe Beacon
Thiết bị cảnh báo E2S SONFL1XAC230R/R SONFL1X Alarm Horn & Xenon Strobe Beacon
Version: | Part code: |
---|---|
12V dc | SONFL1XDC012[x]/[y] |
24V dc | SONFL1XDC024[x]/[y] |
24V ac | SONFL1XAC024[x]/[y] |
115V ac | SONFL1XAC115[x]/[y] |
230V ac | SONFL1XAC230[x]/[y] |
[x] = Enclosure colour: | G: Grey (RAL7038) R: Red (RAL3000) W: White |
y] = Lens colour: | A: Amber B: Blue C: Clear G: Green M: Magenta R: Red Y: Yellow |
Suffix part number with ‘-UL’ for UL approved version. | |
Suffix part number with ‘-M’ for MED approved version [24V dc unit, Clear lens only] | |
CPR – EN54-3 & EN54-23: | |
Part code: | SONFL1XDC024[x]/C |
Environmental class: | Type B – for outdoor use |
Visual range: | Category W-2.4-4.8 |
Signal colour: | Clear (1Hz) |
Full Code: STExCP8PTDCSPL6A1R
Latching push button with tool reset
STExCP8PT: Latching push button with tool reset
D: DPCO/DPDT
C: 2 x 3/4" NPT – adaptors
S: Stainless Steel [Default]
P: Termination board: 6 x 2.5mm² terminals plus 4 x EOL & Series terminals
L: Lift flap supplied as standard
6: Equip. tag only
A1: IECEx & ATEX & CUTR Ex EAC
R: Red
Full Code: GNExCP6B-PB-DSDNRD24E470RS1K5R
Manual Call Point with EOL & series devices
GNExCP6B-PB: B type - choice of end of line devices
D: DPCO/DPDT
S: Stainless Steel [Default]
D: DIN Rail 8 x 2.5mm²
N: No duty label
RD: Red
24: 24V
E470R: Resistor value in Ohms e.g. E470R = 470 Ohm
S1K5R: Resistor value in Ohms e.g. S1K5R = 1.5K Ohm
Full Code: BExS110DFDC024CS1A1R
Latching push button with tool reset
BExS110: Explosion proof alarm horn sounder
DF: Ex d, Flare re-entrant horn
DC024: 24V dc
C: 2 x 3/4" NPT - adaptors
S: Stainless Steel
1: A2 304 Stainless Steel
A1: Default - IECEx, ATEX, Ex EAC & INMETRO
R: Red RAL3000
Full Code: STExCP8PTSCSDL6A1R
Latching push button with tool reset
STExCP8PT: Latching push button with tool reset
S: SPCO/SPDT
C: 2 x 3/4" NPT – adaptors
S: Stainless Steel [Default]
D: DIN Rail 8 x SAK2.5
L: Lift flap supplied as standard
6: Equip. tag only
A1: IECEx & ATEX & CUTR Ex EAC
R: Red
Full Code: GNExCP6B-PB-SSDNRD24E470RS1K5R
Manual Call Point with EOL & series devices
GNExCP6B-PB: B type - choice of end of line devices
S: SPCO/SPDT
S: Stainless Steel [Default]
D: DIN Rail 8 x 2.5mm²
N: No duty label
RD: Red
24: 24V
E470R: Resistor value in Ohms e.g. E470R = 470 Ohm
S1K5R: Resistor value in Ohms e.g. S1K5R = 1.5K Ohm
Full Code: GNExB1X05DC024CS3A1R/R
Xenon Strobe Beacon
X05: Xenon Beacon - 5 Joule
DC024: 20-28V dc
C: 2 x 3/4" NPT – adaptors
S: Stainless Steel [Default]
3: A2 304 St/St with Equip. Tag
A1: IECEx & ATEX
R: Red
R: Red (Lens colour)