Power supply unit - QUINT-PS-100-240AC/24DC/20 . Part No: 2938620

Input data

AC operation

Nominal input voltage range 100 V AC ... 240 V AC

Input voltage range 85 V AC ... 264 V AC

90 V DC ... 350 V DC

Input voltage range AC 85 V AC ... 264 V AC

Input voltage range DC 90 V DC ... 350 V DC

Voltage type of supply voltage AC/DC

Inrush current < 15 A (typical)

Inrush current integral (I2t) < 3.2 A2s

AC frequency range 45 Hz ... 65 Hz

Frequency range DC 0 Hz

Mains buffering time > 25 ms (120 V AC)

> 25 ms (230 V AC)

Current consumption approx. 4.76 A (120 V AC)

approx. 2.3 A (230 V AC)

Nominal power consumption 524 W

Protective circuit Transient surge protection; Varistor

Typical response time < 1 s

Input fuse 12 A (slow-blow, internal)

Permissible DC backup fuse DC: Connect a suitable fuse upstream

Recommended breaker for input protection 10 A ... 16 A (Characteristics B, C, D, K)

Output data

Efficiency > 92 %

Nominal output voltage 24 V DC ±1 %

Setting range of the output voltage (USet) 22.5 V DC ... 28.5 V DC

Nominal output current (IN) 20 A (up to 60 °C)

POWER BOOST (IBoost) 26 A

Derating 60 °C ... 70 °C (2.5%/K)

Feedback voltage resistance 35 V DC

Protection against overvoltage at the output (OVP) ≤ 35 V DC

Max. capacitive load unlimited

Active current limitation Approx. IBOOST = 26 A (for short-circuit)

Control deviation < 1 % (change in load, static 10 % ... 90 %)

< 2 % (change in load, dynamic 10 % ... 90 %)

< 0.1 % (change in input voltage ±10 %)

Residual ripple < 10 mVPP (with nominal values)

Output power 480 W

Peak switching voltages nominal load < 30 mVPP (20 MHz)

Maximum no-load power dissipation < 3 W

Power loss nominal load max. < 44 W

Rise time < 2 ms (UOUT (10 % ... 90 %))

Connection in parallel yes, for redundancy and increased capacity

Connection in series yes

Signal: DC OK active

Output description UOUT > 0.9 x UN: High signal

Maximum switching voltage ≤ 24 V

Output voltage + 24 V DC (Signal)

Maximum inrush current ≤ 40 mA

Continuous load current ≤ 40 mA

Signal: DC OK floating

Output description Relay contact, UOUT > 0.9 x UN: Contact closed

Maximum switching voltage ≤ 30 V AC/DC

Maximum inrush current ≤ 1 A

Continuous load current ≤ 1 A

Signal: DC OK active

Output description UOUT > 0.9 x UN: High signal

Maximum switching voltage ≤ 24 V

Output voltage + 24 V DC (Signal)

Maximum inrush current ≤ 40 mA

Continuous load current ≤ 40 mA

Signal: DC OK floating

Output description Relay contact, UOUT > 0.9 x UN: Contact closed

Maximum switching voltage ≤ 30 V AC/DC

Maximum inrush current ≤ 1 A

Continuous load current ≤ 1 A