MR-PMC 1 output signal isolation converter

Signal isolation converter for variable resistors DISPLAY & POTENTIOMETER ISOLATION CONVERTER

Isolated signal converter

This is a converter that receives signals from various instrumentation devices (pressure, temperature, thermocouple) and transmits them as an insulated DC signal.

Input specifications: 2-wire transmitter, resistance thermometer, variable resistor, AC signal, 2-input adder, 2-input subtractor

Input signal conductor (Reverse), upper/lower limit signal discriminator, thermocouple input, load cell input, sample holder, peak holder,

Frequency, pulse divider, square root extraction type input

Instruction specifications: 3digit FND (RED) (OPTION)

Power specifications: AC 110V/220V 50/60Hz, DC24V (OPTION)

- Product size Small size(mm): 83(H), 51(W), 102mm(D)

- Isolation: input to output to power supply.

- Installation method Wiring: terminal socket wiring.

- Enclosure material Case & color: black ABS plastic case.

- Product weight: about 400g

- Operating ambient temperature: 0 - 50℃

- Storage temperature Non operating ambient temperature: -20 ~ 80℃

- Temperature error Temperature coefficient: 0.015%/℃

- Operating ambient humidity: 90% RH max.(non condensing)

- Insulation resistance: greater than 100Mohm with 500VDC

- Dielectric strength: 1500VAC @ 1minute (input to output to power)

- Conversion accuracy: 0.15% max.

- Response time: 0 - 90% (0.5sec)