Bộ chuyển dổi tĩnh điện 2 chiều Bidirectional Converters F3E SECOM

0944911836 Ms. Duyên 0972835740 Ms. Hà 0385097045 Mr. Hiếu 0392468875 Ms. Anh 0707602728 Ms. Vân
Bộ chuyển dổi tĩnh điện 2 chiều Bidirectional Converters F3E SECOM

Bộ chuyển dổi tĩnh điện 2 chiều Bidirectional Converters F3E SECOM

Bidirectional Converters F3E

The demand for regenerative IGBT "rectifiers" has led to the development of F3E and AFE bidirectional converters with rectifying capabilities and network recovery capacity.

The F3E bidirectional converter is a Fundamental frequency front-end regenerative unit - identified by the SDF code.

It's a regenerative power module solution where the AC/DC converter uses diodes inside the IGBT modules to supply the DC bus, while the IGBTs are used during regenerative operation.

SECOM has created a series of IGBT bidirectionals converters for these specific applications with particular attention to the development of converters in the 100kW-8MW range at 400 and 690Vac.

The main advantages of using F3E regenerative power supplies are:

Economic advantages of a low cost regenerative system

High module power density, thanks to the low module losses.

Further cost reduction of the filter (three-phase inductance), compared to the LCL filter for AFE system

Modular wheeled-mounted system for easy installation and maintenance.
  • F3E SECOM
  • Liên hệ
  • 856
  • Thông tin sản phẩm
  • Bình luận
ELECTRICAL DATA  
AC line input voltage (Vin) 380V ÷ 480V (± 10%)
500V ÷ 690V (± 10%)
AC line output voltage (Vout) - first harmonic 0 ÷ Vdcp / √2
0 ÷ Vdcp*0.86
DC voltage trip treshold (Vdctrip) 820V per SDx.x.x.x.400
1200V for SDx.x.x.x.690
Input frequency range 45 ÷ 65Hz
Output frequency range For motor application: 0 ÷ 500 Hz (@5kHz of switching frequency)
Interface DPM power supply 24Vdc @ 1A without analog supply
STO N.2 channels 24Vdc - 20mA for each channel
Fan power supply 400V; 3AC - 50/60HZ
AMBIENT CONDITION  
Altitude Up to 2000m a.s.l. without derating (>2000m with derating)
Room temperature 0°C ÷ 40°C without derating (40°C ÷ 60°C with derating)
Pollution degree 2
Relative humidity Max 95% in normal conditions
SAFETY FUNCTIONS  
STO SIL 3 PL e - Category 3
MECHANICAL DATA  
Vibration stress EN 60721-3-3 Class 3M1 compliant; EN 60068-2-6
Shock EN 60068-2-27 compliant
Cooling system Forced air with internal fan (water cooled on request)
Weight Up to 178kg

SDF.3.A.240K.690 235 200 196 154 249 244 192 228 227 179 2,0 700 1
SDF.3.A.350K.690 379 330 323 235 411 402 292 368 375 272 3,3 800 1
SDF.3.A.460K.690 472 400 392 300 498 488 373 458 454 348 4,0 1100 1
SDF.2.A.540K.690 540 450 441 346 560 549 431 524 511 401 4,5 1750 1
SDF.2.A.695K.690 695 580 568 446 722 707 555 674 659 517 5,8 1750 1
SDF.2.A.840K.690 840 700 686 538 871 853 670 815 795 624 7,0 1750 1
SDF.2.A.1M02.690 1020 850 833 654 1058 1036 814 989 965 758 8,5 1750 1
SDF.2.A.1M22.690 1220 1020 999 785 1269 1244 977 1183 1158 910 10,2 1750 1
SDF.2.A.1M68.690 1680 1400 1371 1076 1742 1707 1339 1630 1590 1247 14,0 3500 2
SDF.2.A.2M04.690 2040 1700 1665 1308 2116 2073 1628 1979 1931 1516 17,0 3500 2
SDF.2.A.2M44.690 2440 2040 1998 1570 2539 2487 1954 2367 2317 1820 20,4 3500 2
SDF.2.A.3M06.690 3060 2550 2498 1962 3174 3109 2442 2968 2896 2274 25,5 5250 3
SDF.2.A.3M66.690 3660 3060 2998 2355 3808 3731 2931 3550 3475 2730 30,6 5250 3
SDF.2.A.4M88.690 4880 4080 3997 3140 5078 4974 3908 4734 4633 3640 40,8 7000 4
SDF.2.A.6M10.690 6100 5100 4996 3925 6347 6218 4885 5917 5792 4550 51,0 8750 5
SDF.2.A.7M32.690 7320 6120 5995 4710 7616 7461 5862 7100 6950 5460 61,2 10500 6
SDF.2.A.8M54.690 8540 7140 6995 5495 8886 8705 6839 8284 8109 6370 71,4 12250 7
SDF.2.A.9M76.690 9760 8160 7994 6280 10155 9948 7816 9467 9267 7280 81,6 14000 8
Note: 
LD: 110% 1min. every 5min. 
IHD: 150% 1min. every 5min. 
CP: converter parallels (e.g. 2 x SDI.2.A.350K.400)

Sản phẩm cùng loại