Bộ giải mã xung DC25F-B5S2GS AMCI ROTARY SHAFT ENCODER

AMCI DC25 ABSOLUTE DIGITAL SINGLE-TURN ROTARY SHAFT ENCODER

The AMCI absolute digital rotary shaft encoder is another market leading DuraCoder. Utilizing the DuraCoder's resolver based sensor technology, this rotary encoder provides unique position data output in relation to the shaft position, with up to 12 bit resolution.

The absolute DC25 digital output DuraCoder assigns a unique position value to each measured increment. This prevents erroneous readings caused by power failure. When power is restored, the absolute position data is reported without the need for a homing sequence or reference signal.

Package styles for this absolute digital rotary shaft encoder include flange or servo with side or end connector.

Mã sản phẩm:
Giá:
Liên hệ
Lượt xem:
1205

Thông tin sản phẩm
Bình luận

MECHANICAL SPECIFICATIONS

DC25 Absolute Digital Single-Turn Rotary Shaft Encoder
Package style:	2.5" diameter housing available with flange or servo mounting
Housing:	Powder coated aluminum or stainless steel housing
Shaft sizes:	Solid shaft diameter 1/4" , 3/8", 5/8”, or 10 mm diameter stainless steel Hub shaft inner diameter 1/2” standard inner diameter stainless steel shaft 3/8", 1/2", 10mm, and 12mm bore reducers
Shaft loading:	Solid shaft: 1/4", 3/8", and 10mm shafts: 40 lbs. radial/20 lbs. axial maximum shaft loading. Bearing life rated at 2X10^9 revolutions minimum at maximum shaft load. 5/8" shaft: 100 lbs. radial/50 lbs. axial maximum shaft loading. Bearing life rated at 2X10^9 revolutions minimum at maximum shaft load. Hub shaft: 3/8", 1/2", 10mm, and 12mm shafts: 40 lbs. radial/20 lbs. axial maximum shaft loading. Bearing life rated at 2X10^9 revolutions minimum at maximum shaft load.
Starting Torque:	Solid shaft: 1/4”, 3/8”, & 10mm shafts = 2.0 oz-in max @25° C 5/8” shaft = 6.0 oz-in max @25° C Hub shaft: 3/8", 1/2", 10mm, and 12mm shafts = 6.0 oz-in max @25° C
Moment of inertia:	Solid shaft: 1/4", 3/8", & 10 mm shafts = 6.00 x 10-4 oz-in-sec2 5/8" shaft = 8.50 x 10-4 oz-in-sec2 Hub shaft: 3/8", 1/2", 10mm, and 12mm shafts = 7.00 x 10-4 oz-in-sec2
Connector location:	end or side

MATING CONNECTOR: (SOLD SEPERATELY)

	AMCI Part Number	Military Equivalent
Straight	MS-19	MS3116F14-19S

CONNECTOR PINOUT (MILITARY EQUIVALENT PART # MS3112E14-19P)

Pin	Function
Pin	Gray Code	Binary Code	BCD
A	G(0)	2(0)	1
B	G(1)	2(1)	2
C	G(2)	2(2)	4
D	G(3)	2(3)	8
E	G(4)	2(4)	10
F	G(5)	2(5)	20
G	G(6)	2(6)	40
H	G(7)	2(7)	80
J	G(8)	2(8)	100
K	G(9)	2(9)	200
L	G(10)	2(10)	400
M	G(11)	2(11)	800
N	Error Output	Error Output	Error Output
P	Test Input	Test Input	Test Input
R	Direction	Direction	Direction
S	Case GND	Case GND	Case GND
T	DC return	DC return	DC return
U	Latch input	Latch input	Latch input
V	+DC input	+DC input	+DC input

ELECTRICAL SPECIFICATIONS

DC25 Absolute Digital Single-turn Rotary Shaft Encoder
Code Format:	Gray and Binary: 4096 counts per turn (max.) BCD 1000 counts per turn (max.)
Output configuration:	Open Collector Sink (High or Low True). 10.8 to 24 Vdc out. Available with or without a 10 KΩ pull-up resistor. Open Collector Source (High or Low True). 10.8 to 24 Vdc out.
Resolution:	12 bits
Drive capability:	15 mA max. Sink or Source
Power requirements:	10.8 to 26.4 Vdc \| 1.5w max.

ENVIRONMENTAL SPECIFICATIONS

DC25 Absolute Digital Single-turn Rotary Shaft Encoder
Enclosure:	IP67 (valid only with working shaft seal)
Shock:	50 G's for 11 mSec
Vibration:	20 g, 5 to 2,000 Hz
Operating temperature:	-40° C to 85° C standard

Technical Drawings

DC25F-XXXXXE - FLANGE MOUNT, END CONNECTOR

DC25F-XXXXXE - Flange mount, End connector

DC25F-X5XXXE - 5/8" SHAFT, FLANGE MOUNT, END CONNECTOR

DC25F-X5XXXE - 5/8

DC25S-XXXXXE - SERVO MOUNT, END CONNECTOR

DC25S-XXXXXE - Servo mount, End connector

DC25H-XXXXXE - HUB SHAFT, END CONNECTOR

DC25H-XXXXXE - Hub Shaft, End connector

DC25F-XXXXXS - FLANGE MOUNT, SIDE CONNECTOR

DC25F-XXXXXS - Flange mount, Side connector

DC25S-XXXXXS - SERVO MOUNT, SIDE CONNECTOR

DC25S-XXXXXS - Servo mount, Side connector

DC25F-X5XXXS - 5/8" SHAFT, FLANGE MOUNT, SIDE CONNECTOR

DC25F-X5XXXS - 5/8

DC25H-XXXXXE - HUB SHAFT, FLANGE MOUNT, SIDE CONNECTOR

DC25H-XXXXXE - Hub shaft, Flange mount, Side connector

Accessories

Sản phẩm cùng loại