Cảm biến an toàn sau UST- 50LN HOKUYO-Japan

0944911836 Ms. Duyên 0972835740 Ms. Hà 0385097045 Mr. Hiếu 0392468875 Ms. Anh 0707602728 Ms. Vân
Cảm biến an toàn sau UST- 50LN HOKUYO-Japan

Cảm biến an toàn sau UST- 50LN HOKUYO-Japan

A laser scanner (LiDAR) that detects objects at a distance of 5m and a range of 270° with free area settings. Compact and lightweight, it can be used to detect obstacles in AGVs (Automated Guided Vehicles), and to detect intrusion into robots and machines, making factories and logistics more efficient and improving operating rates. For replacing light curtains and mat switches.
  • UST- 50LN HOKUYO
  • Liên hệ
  • 1269
  • Thông tin sản phẩm
  • Bình luận
kinds Detection area setting type
format UST-05LN UST-05LA
product code UUST101 UUST102
Power-supply voltage Power supply voltage DC12V/DC24V (operating voltage range 10 to 30V ripple within 10%)
current consumption 150mA or less (when using 24VDC) However, a rush current of approximately 400mA is required at startup
light source Semiconductor laser (905nm) Laser safety class 1
Detection distance and object 60 mm ~ 5000 mm (White Kent Paper)
60mm to 2000mm (at 10% reflectance)
Minimum detectable object 130mm (varies with distance) *1
Ranging accuracy 60mm~5000mm±40mm *2
Repeatability σ<20mm *2
scanning angle 270 degrees
scanning time 25msec (motor speed 2400rpm)
angular resolution 0.5 degrees
Start-up time Within 10 seconds (However, it may exceed depending on the startup conditions (failure).)
output Output 5 points (photocoupler/open collector output DC30V 50mA MAX.)
Output 1: Output OFF when detected
within area Output 2: Output OFF when detected
within area Output 3: Output OFF when detected within area
Output 4: Fault output (normal) Output ON)
Output 5: Synchronous output
(Note) When a failure output is output, outputs 1 to 3 indicate that there is an obstacle.
input 6 inputs (photocoupler input, anode common, input ON current 4mA)
Inputs 1 to 5: Inputs for switching detection areas
Synchronization input: Synchronization signal input for slave units
Response time *3 OFF: 66msec to 3241msec
ON: 66msec to 3241msec
hysteresis Hysteresis 6.25%
hysteresis 3.125%
hysteresis None (at shipment)
interface USB (USB micro-B type connector)
RS422 (UST-05LA only)
Indicator light Power supply indicator (blue): Lights up during operation, flashes during startup/setting and failure
Output 1 indicator (orange): Lights up when detected within area
Output 2 indicator (orange): Lights up when detected within area
Output 3 indicator (Orange): Lights up when detected within the area
Synchronization function Synchronous operation mode (set by application) *4
Synchronous slave (0°)
Synchronous slave (90°)
Synchronous slave (180°)
Synchronous slave (270°)
Ambient operating temperature/humidity -10°C to +50°C 85% RH or less (no condensation or freezing)
Ambient illumination
Less than 80,000 lx
Vibration resistance 10 to 55Hz double amplitude 1.5mm X. Y. Z direction each 2 hours
55-200Hz 98m/s 2 sweeps 2 minutes X. Y. 1 hour each in Z direction
shock resistance 196m/s2 ( 20G) X. Y. 10 times each in the Z direction
protection structure IP65
mass 130g (excluding cable)
Sản phẩm cùng loại