00312503-FR 0801 Erhardt+Leimer  : FR 0801 edge sensor, infra-red, +/- 12 V as per drawing 057619, transmitter and receiver inside one single enclosure, with electrical connection-plug, red/green LED to indicate sensor state, proportional band +/- 8 mm, protection class-00312503

00029165-FR 0850 Erhardt+Leimer  : FR 0850 edge sensor, infra-red as per drawing M 0247, transmitter and receiver inside one single enclosure, with electric connection-plug, red/green LED to indicate sensor state, proportional band +/- 8 mm, for transparent and non-trans- parent webs-00029165

00023103-FR 0801 Erhardt+Leimer  : FR 0801 edge sensor, infra-red, +/- 12 V as per drawing 057619, transmitter and receiver inside one single enclosure, with electrical connection-plug, red/green LED to indicate sensor state, proportional band +/- 8 mm-00023103

00513909-FR 0850 Erhardt+Leimer  : FR 0850 SENSOR for flap control bestehend aus: 1 pc. Bracket with reflective film for FR 08/09, gap width 150/130 mm, gap depth 100 mm 1 pc. FR 0850 edge sensor, infra-red as per drawing M 0247, transmitter and receiver inside one single enclosure, with electric connection-plug, red/green LED to indicate sensor state, proportional band +/- 8 mm, for transparent and non-trans- parent webs 1 pc. FR 3201-86 spiral signal cable screened with 1 plug and 1x JST, 7 x A 0.14, 1250 mm long, extensible to 8000 mm 1 pc. AK 4002 analog module sensor switch-on device for digital controller, 75 x 111 mm 1 pc. DR 2461-9901 multiple contact strip with cords 9 x A0.25 80 mm length, connection between RK 4002 / RK 4003 / RK 4004 andAK 4002 1 pc. VA 0111 positioning device for 20 x 20 mm bar, as per drawing M 057264 for coarse and fine setting +/-10 mm-00513909

00061478-FR 0801 Erhardt+Leimer  : FR 0801 edge sensor infrared version for triplex mirror proportional band +/- 8-00061478