Cảm biến gia tốc 356A16 | Triaxial ICP Accelerometer
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | |
Measurement Range | ±50 g pk | ±490 m/s² pk | |
Frequency Range (±5 %) (y or z axis) | 0.5 to 5000 Hz | 0.5 to 5000 Hz | |
Frequency Range (±5 %) (x axis) | 0.5 to 4500 Hz | 0.5 to 4500 Hz | |
Frequency Range (±10 ) | 0.3 to 6000 Hz | 0.3 to 6000 Hz | |
Resonant Frequency | ≥25 kHz | ≥25 kHz | |
Broadband Resolution (1) | 0.0001 g rms | 0.001 m/s² rms | [ 2] |
Phase Response (±5 °) | 1.0 to 5000 Hz | 1.0 to 5000 Hz | |
Non-Linearity | ≤1 % | ≤1 % | [ 1] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
ENVIRONMENTAL | |||
Overload Limit (Shock) | ±7000 g pk | ±68600 m/s² pk | |
Temperature Range (Operating) | -65 to +176 °F | -54 to +80 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [ 2] |
Base Strain Sensitivity | 0.001 g/µε | 0.01 (m/s²)/µε | [ 2] |
ELECTRICAL | |||
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
Discharge Time Constant | 1.0 to 3.0 sec | 1.0 to 3.0 sec | |
Settling Time (within 10% of bias) | <10 sec | <10 sec | |
Spectral Noise (1 Hz) | 40 µg/√Hz | 392 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (10 Hz) | 10 µg/√Hz | 98 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (100 Hz) | 3 µg/√Hz | 29.4 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (1 kHz) | 1 µg/√Hz | 9.8 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (10 kHz) | 0.5 µg/√Hz | 4.9 (µm/sec2)/√Hz | [ 2] |
PHYSICAL | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Anodized Aluminum | Anodized Aluminum | |
Sealing | Epoxy | Epoxy | |
Size - Height | 0.55 in | 14.0 mm | |
Size - Length | 0.80 in | 20.3 mm | |
Size - Width | 0.55 in | 14.0 mm | |
Weight | 0.26 oz | 7.4 gm | [ 2] |
Electrical Connector | 1/4-28 4-Pin | 1/4-28 4-Pin | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 10-32 Female | 10-32 Female | |
Mounting Torque | 10 to 20 in-lb | 113 to 225 N-cm |
* All specifications are at room temperature unless otherwise specified
.
[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] See PCB Declaration of Conformance PS023 for details.
Supplied | ||
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
080A12 | Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish | 1 |
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
M081B05 | Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu | 1 |