Cảm biến nhiệt độ IFM Infrared temperature sensor TW2000 TW-030KLBM30-KFDKG/US

0944911836 Ms. Duyên 0972835740 Ms. Hà 0385097045 Mr. Hiếu 0392468875 Ms. Anh 0707602728 Ms. Vân
Cảm biến nhiệt độ IFM Infrared temperature sensor TW2000 TW-030KLBM30-KFDKG/US

Cảm biến nhiệt độ IFM Infrared temperature sensor TW2000 TW-030KLBM30-KFDKG/US

Infrared temperature sensor; M30 x 1.5 mm; PNP; 0...999.5 °C; normally open / normally closed; (parameterisable); analogue; Connector

Đo nhiệt độ đáng tin cậy, không tiếp xúc của các đối tượng có nhiệt độ rất cao

Đối với các ứng dụng trong ngành công nghiệp thép và thủy tinh

Cài đặt trực quan đầu ra tương tự và đầu ra chuyển mạch thông qua nút nhấn

Màn hình hiển thị rõ ràng để hiển thị nhiệt độ hiện tại

Vỏ chắc chắn và ống kính chính xác chống xước để sử dụng trong môi trường công nghiệp khắc nghiệt
  • IFM TW2000
  • Liên hệ
  • 1358
  • Thông tin sản phẩm
  • Bình luận
Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Measuring range
0...999.5 °C 32...1831 °F
Application
Application asphalt; coated metal; liquids; glass; rubber; wood; ceramics; plastics; lacquers; food products; paper; fabric
Electrical data
Operating voltage [V] 18...32 DC; (to SELV/PELV)
Current consumption [mA] < 50
Min. insulation resistance [MΩ] 100; (50 V DC)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 1
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Inputs
Test input type 3 (IEC 61131-2)
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link; (configurable)
Electrical design PNP
Number of digital outputs 1
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 150
Number of analogue outputs 1
Analogue current output [mA] 4...20
Max. load [Ω] 500
Short-circuit protection yes
Type of short-circuit protection pulsed
Short-circuit proof yes
Overload protection yes
Detection zone
Wave length range [µm] 8...14
Measuring/setting range
Measuring range
0...999.5 °C 32...1831 °F
Set point SP
1...999.5 °C 34...1831 °F
Reset point rP
0...998.5 °C 32...1829 °F
Analogue start point
0...949.5 °C 32...1741.1 °F
Analogue end point
50...999.5 °C 122...1831 °F
In steps of
0.5 °C 1 °F
Resolution
Resolution of switching output [K] 0.5
Resolution of analogue output [K] 0.2; (+ 0.03% of the set measuring span)
Resolution of display [K] 0.5
Accuracy / deviations
Accuracy [K] < ± 1 %; (of measured value, min. 2 K (degree of emission = 1, T = 23 °C))
Repeatability [K] 1
Response times
Response time [ms] 100
Software / programming
Adjustment of the switch point programming buttons
Parameter setting options analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
SIO mode yes
Required master port type A
Process data analogue 16
Process data binary 1
Min. process cycle time [ms] 3.6
Supported DeviceIDs
Type of operation DeviceID
Default 716
Operating conditions
Ambient temperature [°C] 0...65
Storage temperature [°C] -20...80
Max. relative air humidity [%] 95; (non condensing)
Protection IP 65
Tests / approvals
EMC
DIN EN 61000-6-2  
DIN EN 61000-6-4  
Shock resistance
DIN EN 60068-2-27 30 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 5 g (10...2000 Hz)
MTTF [years] 88
Mechanical data
Weight [g] 411.5
Housing threaded type
Dimensions [mm] M30 x 1.5
Thread designation M30 x 1.5
Materials threaded sleeve: stainless steel (1.4305 / 303); polyester
Lens material
Infrared transparent crystal lens with anti-reflex coating
Displays / operating elements
Display
Display unit 2 x LED, yellow
switching status 1 x LED, yellow
function display 7-segment LED display, 4-digit
measured values 7-segment LED display, 4-digit
Operating elements
3 pushbuttons
Accessories
Items supplied
lock nuts: 2
Remarks
Remarks
Use a screened cable to protect infrared temperature sensors from interference.
The screen must be connected to the housing of the sensor via the connector.
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12
Diagrams and graphs
 
1 diameter of the measured spot
2 measuring distance
Sản phẩm cùng loại