Cảm biến quang HOKUYO PEX eco PEX-205C PEX-403C PEX-801C
kinds | Transparent type | Regressive reflection type | Diffuse reflection type |
Model | PEX-205C | PEX-403C | PEX-801C |
Power-supply voltage | DC12-24V (maximum operating range DC10-30V ripple ± 10% included) | ||
Current consumption | Floodlight: 8mA or less | 13mA or less | 15mA or less |
Receiver: 11mA or less | |||
light source | Red LED | ||
Detection distance | 20m | 4m * 1 | 80cm * 2 |
Detected object | Opaque body of φ12 mm or more | Opaque body of φ50 mm or more | Opaque body |
Spot diameter | φ0.8m (at 20m) | φ200mm (at 4m) | φ110mm (at 800mm) |
Response time | 0.5ms or less | ||
action mode | Switching by volume (L: operation when light is on / D: operation when shading) | ||
Control output | NPN open collector output 100mA DC30V or less, residual voltage 1.8V 100mA or less | ||
Sensitivity regulator | Attached | ||
Indicator light | Margin indicator light: green LED, output indicator light: orange LED * 3 | ||
connection | Cable drawer type φ3.8mm, 2m length, 3 cores 0.2mm 2 * 4 | ||
Ambient illuminance used | Incandescent lamp: 3,000lx or less, sunlight: 10,000lx or less | ||
Operating ambient temperature | -25 to + 55 ° C (during storage -40 to + 70 ° C) | ||
Ambient humidity used | 35-85% RH (35-95% RH when stored), but do not freeze or condense | ||
Vibration resistant | Double amplitude 1.5mm 10-55Hz X / Y / Z direction 2 hours each | ||
Impact resistance | 1,000m / s 2 X / Y / Z directions 3 times each | ||
Protective structure | IP67 (IEC standard) | ||
Case material | Material Body: ABS glass fiber resin, Lens (front cover): PMMA resin | ||
mass | Floodlight: Approximately 45g | About 55g | |
Receiver: Approximately 55g | |||
accessories | Mounting bracket | Mounting bracket | Mounting bracket |
Reflector (RRP-50S-V) |