Model DTA-1D DTA-3D DTA-5D DTA-10D DTA-15D DTA-25D
Series CA, SA CA, SA CA, SA CA, SA CA, SA, CR, SR CA, SA, CR, SR
Measuring range ±1 mm ±3 mm ±5 mm ±10 mm ±15 mm ±25 mm
Linearity
≤ ±0.5 % FSO - - - - - ≤ ±300 µm
≤ ±0.3 % FSO ≤ ±6 µm ≤ ±18 µm ≤ ±30 µm ≤ ±60 µm ≤ ±90 µm on request
≤ ±0.15 % FSO ≤ ±3 µm ≤ ±9 µm ≤ ±15 µm on request -
Temperature stability 1) Zero ≤ 70 ppm FSO/K
Max. temp. error ≤ 150 ppm FSO/K
Sensitivity 133 mV / mm/V 85 mV / mm/V 53 mV / mm/V 44 mV / mm/V 45 mV / mm/V 33 mV / mm/V
Excitation frequency 5 kHz 2 kHz 1 kHz
Excitation voltage 550 mV
Connection CA/CR integrated cable (3 m) with open ends; radial or axial cable outlet depending on series;
cable diameter 4.6 mm; min. bending radius 20 mm (fixed installation)
SA/SR 5-pin connector; radial or axial output depending on series (see accessories for connection cable)
Temperature range Storage -40 … +80 °C
Operation -20 … +80 °C (optional up to 200 °C on request)
Pressure resistance atmospheric pressure (optional 5 bar or 100 bar on front side on request)
Shock (DIN EN 60068-2-27) 40 g / 6 ms in 3 axes, 1000 shocks each
100 g / 6 ms in 3 axes, 3 shocks each
Vibration (DIN EN 60068-2-6) ±1.5 mm / 10 … 58 Hz in 2 axes, 10 cycles each; ±20 g / 58 … 500 Hz in 2 axes, 10 cycles each
Protection class (DIN EN 60529) IP67 (plugged)
Material Stainless steel (housing)
Weight
Sensor CA/CR approx. 90 g approx. 100 g approx. 100 g approx. 105 g approx. 195 g approx. 230 g
Sensor SA/SR approx. 15 g approx. 20 g approx. 25 g approx. 30 g approx. 106 g approx. 145 g
Plunger approx. 2 g approx. 3 g approx. 4 g approx. 5 g approx. 12 g approx. 17 g
Compatibility MSC7401, MSC7802, MSC7602