Mô đun GE-Emerson IC693CPU350 Single-Slot CPU Module IC693CPU350-DH

Mô đun GE-Emerson IC693CPU350 Single-Slot CPU Module IC693CPU350-DH

Mô đun GE-Emerson IC693CPU350 Single-Slot CPU Module IC693CPU350-DH

GE-Emerson IC693CPU350 Single-Slot CPU Module

8 baseplates per system (1 CPU + 7 expansion and/or remote).

Code :IC693CPU350

CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K, The battery for theCPU is now included in the CPU

backplane box.

  • IC693CPU350
  • Liên hệ
  • 791
  • Thông tin sản phẩm
  • Bình luận
IC697ACC720 90-70 Blank Slot Filler Rack Chassis Filler Face Plate GE Fanuc PLC Series 9070 Filler Module
IC693ALG220 Voltage Analog Input 4 Ch IC693A 0-10V IC693AL IC693ALG provides four channels of input
IC693ALG221 Current Analog Input 4PT IC693A 4- 20 ma IC693AL IC693ALG provides four channels input
IC693ALG222 High Density GE Analog Input 16/8 IC693A Voltage sixteen channels single ended IC693ALG
IC693ALG223 High Density GE Analog Input 16 IC693A Current 4-20 ma allows 16 channels IC693ALG
IC693ALG390 Low Density GE Analog Voltage Output 2PT IC693A Module two ouput channels IC693ALG
IC693ALG391 Low Density GE Analog Current Output module 2 channels 12 bit resolution. IC IC693ALG
IC693ALG392 High Density GE Analog Output 8PT IC693A Current / Voltage allowing eight single IC693ALG
IC693ALG442 Mixed Analog 4IN/2OUT IC693A Voltage or Current makes for versitle module IC693ALG
IC693PTM101 Power Transducer Module Compatable with Series 90-30 PTM101 IC693 IC693P IC693PT
IC693TCM302 Temperature Control Module TCM302 Series 90-30 IC693 IC693T IC693TCM IC693TCM3
IC693BEM331 31 devices Genius Bus Controller I/O Link master I/O control enhanced by communications
IC693BEM332 Series 90-30 FIP Remore I/O 2.5mhz Module is Compatable with 90-30 Series IC693BEM332
IC693BEM333 GE Fanuc Series 90-30 Remote FIP Interface Module is Compatable with 90-30 IC693BEM333
IC693BEM334 Series 90-30 Genius Bus Controller Module is Compatable with 90-30 Series GE Fanuc PLC
IC693BEM335 GE Fanuc Series 90-30 FIP Remote I/O 2.5mhz Module is Compatable with 90-30 IC693BEM
IC693BEM340 FIP Bus Controller Management of slave devices Monitoring of slave devices IC693BEM
IC693BEM341 2.5 MHZ FIP Controller The 2.5MHz version of requires a Release 8.10 version IC693BEM
IC693BEM350 GE Fanuc Series 90-30 Ethernet Network Interface Unit Module is Compatable with 90-30
IC693CDC200 GE Fanuc Csan Interface Module Module is Compatable with 90-30 Series IC693CD IC693CDC
IC693CMM301 Genius Communications configuration completed using Hand_held Programme software IC69
IC693CMM302 Communication card, Genius Series 90-30 PLC module, providing Global Data IC693CMM
IC693CMM304 GE 90-30 Alstom N80 CMM304 high-performance microcomputer IC693CMM3 GE Fanuc
IC693CMM305 Alstom CMM305 ALSPA N80 Enhanced Comm Module Series Six PLC GE Fanuc Serie IC693C
IC693CMM311 IC693CMM Communications Card user interfaces for the CMM311 and CMM711 9030
IC693CMM321 IC693CMM Modbus Ethernet Interface Transmit Data (TD) and Receive Data (RD) 9030
IC693DNM200 DeviceNet Master Module allows a PACSystems RX3i to send and receive I/O data IC693DNM
IC693DNS201 DeviceNet Slave Module support Get and Set PLC Registers IC693DN IC693DNS Slave Module
IC693NIU004 ETHERNET NETWORK INTERFACE GE Fanuc Series 90-30 NIU004 ModuleIC693NI IC693NIU
IC693PBM200 Siemens Profibus DP Master Module PBM200 Series 90-30 Module Profi IC693PB IC693PBM
IC693PBS201 Siemens Profibus DP Slave Module PBS201 Module Series 90-30 Profi Bus IC693PB IC693PBS
IC693PCM300 Programmable Coprocessor Module (PCM) 160 KB PCM300 Series 90-30 IC693P IC693PC
IC693PCM301 IC693PCM PCM 192 KB Programmable Coprocessor Module (PCM) 301 IC693P IC693PC
IC693PCM311 PCM Programmable Coprocessor Module (PCM) 311 Series 90-30 640 KB IC693P IC693PC
IC693PIF300 INTERFACE MODULE Compatable with GE Fanuc Series 90-30 PLC PIF300 IC693P IC693PI
IC693CPU311 5-slot baseplate with embedded CPU, 1K Byte Register Memory use small fraction 9030
IC693CPU313 5-slot baseplate with embedded CPU, 2K Bytes Register MemoryFirmware for CPUs 9030
IC693CPU321 10 SLOT CPU RACK Configuring a model 331 rack size will produce Non-fatal hardware IC6
IC693CPU323 10-Slot Rack With Turbo CPU in base Firmware for these CPUs is in a replaceable EPROM IC
IC693CPU331 CPU (16K Bytes) 10 MHz modular CPUs consist of a CPU, memory IC693CPU Compatable
IC693CPU340 PROCESSOR CPU 80C188XL microprocessor 20 MHz, 32K Bytes User Program IC693CPU 9030
IC693CPU341 CPU341 module PROCESSOR 20 MHz, 80K Bytes User Program Memory IC693CPU GE Fanuc
IC693CPU350 CPU 350 25 MHz Complimentary Metal-Oxide Semiconductor Random Access Memory
IC693CPU351 CPU 351 Flash Firmware (Standard and User Memory) 25 MHz IC693CPU Compatabe with
IC693CPU352 CPU 352 Capacities Speed: 25 Processor: 80386EX 25 MHz, math coprocessor IC693CPU
IC693CPU360 CPU 360 Memory: 240K1 Confirgurable All Series CPUs can work with integer numbers
IC693CPU363 CPU 363 CPU module, 25 MHz, with two extra serial ports 90-30 State Logic CPU IC693CPU
IC693CPU364 CPU 364 and Ethernet Interface communicate without using the PLC backplane IC693CPU
IC693CPU367 CPU 367 Module with PROFIBUS Slave Firmware 90-30 Embedded Interface Series 90-30 CPU
IC693CPU370 GE CPU Ethernet CPU firmware stored in Flash memory loaded serial port connector IC693CPU
Sản phẩm cùng loại