thiết bị đồng bộ thời gian hãng Meinberg model LANTIME M300/ GPS NTP Server in 1U Case for Server Rackmount
Display | LC-display, 2 x 40 characters, with backlight |
Control elements | Eight push buttons to set up basic network parameters and to change receiver settings |
Status info | Four bicolor LEDs showing status of: - reference time - time service - network - alarm |
Frequency outputs | 10 MHz via female BNC connector, TTL into 50 Ohm Accuracy depends on oscillator (standard: TCXO), look at oscillator list |
Pulse outputs | Pulse Per Second (PPS), TTL level, pulse width: 200ms |
Accuracy of pulse outputs | Depends on oscillator option: < ±100ns (TCXO, OCXO LQ) < ±50ns (OCXO SQ, OCXO MQ, OCXO HQ, OCXO DHQ) |
Interface | Two independent serial RS-232 interfaces, menu configurable (in case of RDT models without internal receiver - the serial interfaces will be used as reference input). |
Optional Output Signals | Additional Output Options:: This LANTIME NTP server comes with many additional outputs options: PPS, 10MHz, programmable pulse outputs (PPS, PPM, PPH, DCF_MARK ...), IRIG modulated and unmodulated time code, T1 / E1 telecom signals, Frequency Synthesizer - to name just a few. Contact us for your specific device configuration. |
Data format of interfaces | COM 0: Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data Format: 8E1, 8E2, 8N1, 8N2, 8O1, 7E1, 7E2, 7N2, 7O1, 7O2 Time Telegram: Meinberg Standard-Telegram , SAT, NMEA RMC, Uni Erlangen (NTP), COMPUTIME, Sysplex, Capture-Telegramm, SPA, RACAL, Meinberg GPS, NMEA GGA, NMEA RMC GGA, NMEA ZDA, ION, 6021 or IRIG-J |
Network Interface | Standard: 2 x 10/100 MBit with RJ45 connector Available Options:
|
Universal Serial Bus (USB) Ports | 1x USB Port in front panel: - install firmware upgrades - backup and restore configuration files - copy security keys - lock/unlock front keys |
Power supply | Standard: 100-240 V AC (50/60 Hz) available DC variants: 100-200 V DC, 12 V DC and 20-60 V DC |
CPU |
|
Operating System of the SBC | Linux with nano kernel (incl. PPSkit) |
Network protocols OSI Layer 4 (transport layer) | TCP, UDP |
Network protocols OSI Layer 7 (application layer) | TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP |
Internet Protocol (IP) | IP v4, IP v6 |
Network Autoconfiguration Support | IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131) IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and Autoconfiguration Networking - AUTOCONF (RFC 2462) |
Network Time Protocol (NTP) | NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905) SNTP v3 (RFC 1769), SNTP v4 (RFC 4330) MD5 / SHA-1 Authentication and Autokey Key Management |
Parallel Redundancy Protocol (PRP) | PRP (IEC 62439-3) |
Time Protocol (TIME) | Time Protocol (RFC 868) |
Daytime Protocol (DAYTIME) | Daytime Protocol (RFC 867) |
IEC 61850 | Synchronization of IEC 61850 compliant devices by using SNTP |
Hypertext Transfer Protocol (HTTP) | HTTP/HTTPS (RC 2616) |
Secure Shell (SSH) | SSH v1.3, SSH v1.5, SSH v2 (OpenSSH) |
Telnet | Telnet (RFC 854-RFC 861) |
Simple Network Management Protocol (SNMP) | SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418) |
Form Factor | 19 inch multipac metal case 1U/84HE |
Ambient temperature | 0 ... 50°C / 32 ... 122°F |
Humidity | Max. 85% |
Scope of supply | Included in delivery is a MEINBERG outdoor antenna incl. mounting kit, pre-assembled antenna cable (except MRS, TCR and RDT models) and product documentation on USB storage. |
Technical Support | Meinberg offers free lifetime technical support via telephone or e-mail. |
Warranty | Three-Year Warranty |
Firmware Updates | Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product. |
RoHS-Status of the product | This product is fully RoHS compliant |
WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |