Specification

Description

Signal Output Types

0.5 to 4.5 VDC Ratiometric 0 to 10 VDC
4 to 20 mA
0 to 5 VDC

1 to 5 VDC

Pressure Port Type [Required Assembly Torque]

1/8 in. - 27 NPT, external thread ANSI B1.20.1 [16.26 N•m (12 ft•lb)] 1/4 in. SAE 45° flare, external thread [16.26 N•m (12 ft•lb)]
1/4 in. SAE 45° flare with Schrader® Valve depressor,
internal thread [16.26 N•m(12 ft•lb)]

1/4 in. - 18 NPT, external thread ANSI B1.20.1 [20.33 N•m (15 ft•lb)] 1/2 in. - 20 UNF-2A external, [20.33 N•m (15 ft•lb)]
1/4 in. - 18 NPTF external, [20.33 N•m (15 ft•lb)]
M16 X 1.5 Ermeto® internal thread, ISO 8434-1 [33.89 N•m (25 ft•lb)]

Electrical Connector

AMP, 174357-2
Hirschmann Form C, 9.5 mm EN 175 301 - 803 Hirschmann Form A, 18 mm EN 175 301 - 803
Packard, Metri-Pack 150 series, P2S
Shielded cable; shield not connected to the sensor body M12 X 1P, DS/EN 60947-5-2

Temperature Range

Compensated temperature: -40° to 125°C (-40° to 257°F)
Media temperature (pressure side): -40° to 125°C (-40° to 257°F) Operating temperature (ambient air): -40° to 100°C (-40° to 212°F) Storage temperature, -40° to 125°C (-40° to 257°F)

Accuracy

Total accuracy: +/- 1.5%
Best-Fit Straight Line (BFSL): +/- 0.5% Long term stability (1 year): +/- 1.25%

Required Output Signal Supply Voltage

0.5 to 4.5 VDC Ratiometric: 4.75 to 5.25 VDC 0 to 10 VDC: 12 to 33 VDC
4 to 20 mA: 9 to 32 VDC
0 to 5 VDC and 1 to 5 VDC: 9 to 33 VDC

Maximum Signal Input Current

0.5 to 4.5 VDC Ratiometric: 3 mA 0 to 10 VDC: 5 mA
4 to 20 mA: 24 mA
0 to 5 VDC and 1 to 5 VDC: 5 mA

Electrical Protection

• Standardresponsetime:5mS,+/-4mS

• Outputimpedance:greaterthan25ohm

• Outputloadshallbegreaterthan10Kohm(resistancesignaloutcansupportforvoltoutmodels)

• Reversewiringprotection:(+andcommon)(+andsignalout)(commonandsignalout)

• Short-circuitprotected:(signaloutatmaximumspantoearth)

• Minimum ohms (body to term): 100 M ohm at 500 VDC