Bộ chuyển đổi tín hiệu độ rung 682C03 | ICP VIBRATION TRANSMITTER

  1. trangchu
  2. Sản phẩm
  3. Thiết bị cảm biến
  4. PCB Piezotronics
  5. Bộ chuyển đổi tín hiệu độ rung 682C03 | ICP VIBRATION TRANSMITTER
Bộ chuyển đổi tín hiệu độ rung 682C03 | ICP VIBRATION TRANSMITTER

Bộ chuyển đổi tín hiệu độ rung 682C03 | ICP VIBRATION TRANSMITTER

Platinum Stock Products: DIN rail mount vibration transmitter (for use w/ICP sensor), 4-20 mA outputs for vibration and temperature, 0-5/0-10 VDC output for vibration, raw vibration output, 3 Hz to 10 kHz frequency range

Output Signal: 4 to 20 mA

Frequency Range: (-3dB)180 to 600000 cpm ( 3 to 10k Hz)

DC Power: 23 to 25 VDC
  • Liên hệ
  • 1353
  • Thông tin sản phẩm
  • Bình luận
ENGLISH: SI:  
PERFORMANCE
Channels 1 1  
Input Signal (Vibration) ±100 mV/g ±10.2 mV/(m/s²) [ 8]
Input Signal (Temperature) 0 to 1.2 VDC 0 to 1.2 VDC [ 5]
Output Signal (DC Vibration) 4 to 20 mA 4 to 20 mA [ 4]
Output Signal (DC Vibration) 0 to 5 VDC 0 to 5 VDC [ 6] [ 9]
Output Signal (DC Vibration) 0 to 10 VDC 0 to 10 VDC [ 6] [ 9]
Output Signal (Temperature) 4 to 20 mA 4 to 20 mA [ 5]
Output Signal (±0.01 %) (AC Vibration) 100 mV/g 10.2 mV/(m/s²) [ 1]
Frequency Range (-3 dB) (Acceleration) 180 to 600000 cpm 3 to 10k Hz [ 2] [ 10] [ 11]
Frequency Range (-3 dB) (Velocity) 210 to 600000 cpm 3.5 to 10k Hz [ 2] [ 10] [ 11]
Frequency Range (-3 dB) (Displacement) 210 to 60000 cpm 3.5 to 1000 Hz [ 2] [ 3] [ 10]
Output Range (DC Acceleration) 0 to 5.00 g pk or rms 0 to 49.03 m/s2 pk or rms [ 7] [ 8] [ 9]
Output Range (DC Acceleration) 0 to 10.00 g pk or rms 0 to 98.06 m/s2 pk or rms [ 7] [ 8] [ 9]
Output Range (DC Acceleration) 0 to 20.00 g pk or rms 0 to 196.12 m/s2 pk or rms [ 7] [ 8] [ 9]
Output Range (DC Velocity) 0 to 0.5 in/sec pk or rms 0 to 12.7 mm/s pk or rms [ 7] [ 8] [ 9]
Output Range (DC Velocity) 0 to 1.00 in/sec pk or rms 0 to 25.4 mm/s pk or rms [ 7] [ 8] [ 9]
Output Range (DC Velocity) 0 to 2.00 in/sec pk or rms 0 to 50.8 mm/s pk or rms [ 7] [ 8] [ 9]
Output Range (DC Displacement) 0 to 10.0 mil pk - pk 0 to 0.254 mm pk - pk [ 7] [ 8] [ 9]
Output Range (DC Displacement) 0 to 20.0 mil pk - pk 0 to 0.508 mm pk - pk [ 7] [ 8] [ 9]
Output Range (DC Displacement) 0 to 40.0 mil pk - pk 0 to 1.02 mm pk - pk [ 7] [ 8] [ 9]
ENVIRONMENTAL
Temperature Range (Operating) -13 to 158 °F -25 to 70 °C  
Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
Humidity Range (Non-Condensing) 0 to 95 % 0 to 95 %  
ELECTRICAL
Power Required DC Power DC Power  
DC Power 23 to 25 VDC 23 to 25 VDC  
DC Power (maximum) 100 mA 100 mA  
Settling Time <2 min <2 min  
Excitation Voltage (delivered to sensor) 17 to 19 VDC 17 to 19 VDC [ 12] [ 13]
Constant Current Excitation (delivered to sensor) 3 to 5 mA 3 to 5 mA [ 12] [ 13]
Output Span (±5.0 %) (DC Vibration Current Output) 16 mA 16 mA  
Output Span (±5.0 %) (Temperature Output) 16 mA 16 mA  
Output Span (±5.0 %) (DC Vibration Voltage Output) 5 or 10 VDC 5 or 10 VDC [ 9]
PHYSICAL
Electrical Connector (input/output) Removable Screw Terminals Removable Screw Terminals  
Electrical Connector (raw vibration output) BNC Jack BNC Jack  
Housing Material Polyamide Polyamide  
Size - Height 3.9 in 99 mm  
Size - Width 0.9 in 22.5 mm  
Size - Depth 4.5 in 114.5 mm  
Weight (Maximum) 6.4 oz 127  
Screw Terminal Wire Size 24-14 AWG 24-14 AWG  
Din Rail Mount 1.38 in 35 mm  
Status Indicator (Power "on") Green LED Green LED  
Status Indicator (Input Fault) Red LED Red LED  
Status Indicator (Measurement Mode - Acceleration) Green LED Green LED  
Status Indicator (Measurement Mode - Velocity) Green LED Green LED  
Status Indicator (Measurement Mode - Displacement) Green LED Green LED  

* All specifications are at room temperature unless otherwise specified

.




 

Specification Notes

[ 1] Achieved with 100 mV/g ICP® accelerometer input.
[ 2] Attenuation is -40 dB/decade.
[ 3] Maximum 1,000 Hz for displacement.
[ 4] Output current voltage will fluctuate at frequencies below 5 Hz.
[ 5] Requires use of accelerometer with "TO" temperature output option.
[ 6] Factory set, 0-5 VDC.
[ 7] Factory set, 1.0 in/sec peak
[ 8] Output measurement range is based upon input from 100 mV/g ICP® accelerometer and will be scaled inversely proportional to any percentage deviation of this input.
[ 9] Internal Dip switch selectable
[ 10] The low frequency tolerance is accurate within ± 0.5 Hz of the specified frequency.
[ 11] The high frequency tolerance is accurate within ± 0.5 kHz of the specified frequency.
[ 9] Internal Dip switch selectable
[ 12] Jumper selectable for 18 VDC regulated, 24 VDC power supply voltage or ICP® sensor excitation disabled
[ 13] 4 mA constant current diode is internal to 9330VT
[ 14] See PCB Declaration of Conformance PS152 for details.

 

Sản phẩm cùng loại
dv002326pxppicams300idisplay1re-1647.jpg

Cảm biến đo khoảng cách LEUZE AMS 307i 40 Optical distance sensor Part no.: 50137593

bwu2002-7501.png

Thiết bị giao tiếp truyền thông công nghiệp bihl-wiedemann BWU2002 ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 2 ASi masters

screenshot-2024-03-01-103913-4011.png

Cảm biến hướng gió Wind Direction Transmitter 4.3151.10.212 Thies Clima

screenshot-2024-03-01-102525-8655.png

Pin load cell SPT1573 ADOS

screenshot-2024-03-01-102158-8846.png

Cảm biến tải trọng Compression load cell HKM , 9500159

screenshot-2024-03-01-101808-2636.png

Cảm biến AI-TEK INSTRUMENTS RH1612-014 RH SERIES HALL EFFECT SENSOR

screenshot-2024-02-29-211813-6354.png

Cảm biến siêu âm Ultrasonic Sensor Model: US2010/70, BST

cong-tac-giat-day-schmersal-t3z068-22yr-7785.png

Công tắc giật dây Schmersal T3Z068-22yr T3Z 068-22YR Item number: 101087881

screenshot-2024-01-23-155027-4558.png

Cảm biến khuếch tán Diffuse sensor with background suppression Model HRT 96M/P-1600-2000-42, Part no.: 50060857 Leuze

screenshot-2024-01-23-091606-1594.png

Cảm biến quang Polarized retro-reflective photoelectric sensor Model PRK 96M/P-1400-22, Part no.: 50025178 Leuze

screenshot-2024-01-23-090943-8852.png

Cảm biến khuếch tán Diffuse sensor with background suppression Model HRT 96M/A-1660-1200-44, Part no.: 50025112 Leuze

screenshot-2024-01-23-085953-4131.png

Cảm biến an toàn Safety sensor/deflecting mirror set Model MLD-M002-UDC-1300-S2 , Part no.: 905065 Leuze

screenshot-2024-01-23-084824-3646.png

Cảm biến an toàn Safety sensor/transmitter set Model MLC500T14-300-IP, Part no.: 544000 Leuze

screenshot-2024-01-23-082841-6886.png

Cảm biến an toàn Safety sensor set Model MLC510-14-300.1-B, Part no.: 426634 Leuze

screenshot-2024-01-23-081749-4316.png

Cảm biến an toàn Safety sensor/transceiver set Model: MLD520-RT2-UDC-1600-S2, Part no.: 426534 Leuze

screenshot-2024-01-23-082059-9518.png

Cảm biến Muting sensor set Model Set-AC-MLX.2-2S, Part no.: 426447 Leuze

screenshot-2024-01-23-081749-9418.png

Cảm biến an toàn Safety sensor/transmitter set Model: MLD500-T3L-UDC-1300-S2 , Part no.: 426280 Leuze

cam-bien-sieu-am-leuze-igsu14e-1wt3-m12-4120.jpg

Cảm biến siêu âm Leuze IGSU14E/1WT.3-M12 Ultrasonic fork sensor Part no.: 50142872

screenshot-2024-01-15-151919-7439.png

Cảm biến Inductive Sensor Model : BI4U-EM12EWD-VP6X-H1141 , Ident. no.: 1635012, TURCK

screenshot-2024-01-15-151508-6747.png

Cảm biến Inductive Sensor Model : BI1.5-EG08K-Y1 , Article No: 1003600 TURCK

Công tắc lệch băng Model: T. 250-22Z-H-1224 1S1OE=10G./=25G Schmersal

p-mpa-21-a-1-2802.jpg

Bộ khuếch đại tín hiệu dùng cho thang máy Telco MPA 21 A 500 Multiplexed Amplifier

bo-khuech-dai-tin-hieu-dung-cho-thang-may-telco-amp21c500-9751.png

Bộ khuếch đại tín hiệu dùng cho thang máy Telco AMP21C500 Telco AMP 21 C 500 AMP 21 C Telco MULTIPLEXED AMPLIFIER SERIES

20170626105407975-9849.jpg

Cảm biến đo độ rung Provitech TM016-001-434-22-0 TM016 Velocity/ Acceleration Vibration Transmitter TM016-121-120-00-0