Bộ điều khiển nhiệt độ Geotech Temperature Controller GW series Model GW-01 Geo Tech, GW-03 Geo Tech, G-101 Geo Tech, G-103 Geo Tech

3 inputs: Displays each of the 3 inputs and controls based on the highest value among them.
- Size (164x81.5x117): This is a type that is fastened from the front and is easy to install.
- Proven POWER: The operating power is free voltage and can be used stably even under adverse conditions such as changes in external power and surges.
  It has built-in power that has been verified for reliability not only domestically but also overseas.
- High output: Equipped with ample relay output contact capacity, problems such as contact burnout are minimized.
  (Example: Rated 10A-MAX.16A)
- Various output contacts: Alarm and trip relay output contacts apply C contacts, so when B contacts are needed, they
   can be used without the need to add them externally.
- Transmission specifications: Current transmission is standard, and the optional communication specification uses Modbus. Both ASCII and RTU modes can be used to
   ensure customer convenience.
- Fault function: Built-in function to detect and display disconnection or short circuit of the input sensor and output to relay contact point.
- Built-in fuse: A fuse is attached to the back to protect the device and make it convenient for maintenance.

Bộ điều khiển nhiệt độ Geotech Temperature Controller GW series Model GW-01 Geo Tech, GW-03 Geo Tech, G-101 Geo Tech, G-103 Geo Tech
SIZE    164(W)x81.5(H)x117(D)mm
User environment (Ambient, Temp. & Huminity)    Operating environment: -5~55℃ /10~90%RH(no condensation)Altitude: Below 2000M
Input    3 INPUT(3 CH) Pt100 ohm (DIN,IEC751)
Measuring Range    0~200℃
Output    FAN-10A,ALARM-5A,TRIP-5A,FAULT-5A
Transmission current output    DC4~20mA (proportional to 0~200℃)
Power Supply    FREE VOLT. AC90~260V, DC100~300VAC120~300V (OPTION)
Communication (OPTION) (Communication Output)    RS485 MODBUS RTU & ASCII AUTO
The Others    Fault, Buzzer, Temp. Max FunctionData storage Function