Type Description
0188614000 Fixing bracket for wall mounting
0274605000 Angled ball joint for clamping lever with M10 nut
0294967000 Pivot pin for clamping lever UNG_0370205001 Heating resistor 5 W, 230 V~
0370205002 Heating resistor 5 W, 24 V~
0370396000 3 insertable auxiliary change-over contacts, 10(2) A 250 V~
0370479000 Steel hood + manual adjuster, hammer enamel finish RAL 1020
0370486000 Clamping lever, complete (including square hub)
0370493000 2 auxiliary contacts Min. load: 100 mA, 24 V~
0370628000 Adaptor plate including 4 M6 countersunk screws for replacing A33 W. with A44 W.
0370638000 Straight ball joint for clamping lever with nut (M10)
0370715001 Cover made of die-cast aluminium with rubber seal, type of protection IP 55
0371290001 Cover, black, made of die-cast aluminium with display window, rubber seal, position indicator and scale, type of protection IP 55
0372460001 Cable screw fitting (plastic M20 × 1,5) incl. locking nut and seal
0370640001 Potentiometer 2000 Ω, 1.0 W with friction coupling
0370640002 Potentiometer 130 Ω, 1.0 W with friction coupling
0370640006 Potentiometer 1000 Ω, 1.0 W with friction coupling
0370641001 Dual-operation potentiometer 130/2000 Ω, 1.0 W with friction coupling
0370641002 Dual-operation potentiometer 2000/2000 Ω, 1.0 W with friction coupling
0370641006 Dual-operation potentiometer 130/140 Ω, 1.0 W with friction coupling
0370644001 Rotation-angle cog set 90° or 180°, with coupling
0370644002 Rotation-angle cog set 120° or 150°, with coupling
0370645006 Potentiometer 1000 Ω, 1.0 W with rigid coupling
0370645007 Potentiometer 5000 Ω, 1.0 W with rigid coupling
0370646001 Rotation-angle cog set 90°, without coupling
0370646002 Rotation-angle cog set 120°, without coupling