Bộ giải mã xung LINE SEIKI CB-100HC CB-500HC Rotary encoder
ELECTRICAL | ||||
Model | CB-□HC | CB-□LC | CB-□LV | CB-□LD |
Power Supply (Ripple 3% max.) |
DC12 - 24V ±10% | DC5 - 12V ±10% | DC5V ±10% | |
Current Consumption | 50 mA max. | |||
Output | Open Collector | Voltage | Line Driver | |
Output Signal | 90°Quadrature + Zero Marking | |||
Output Phase | A,B,Z | A,B,Z,![]() ![]() ![]() |
||
Output Capacity | Sink Current: 35mA max. Residual Voltage: 0.5V max. |
Sink Current 20 mA max. |
±20mA | |
Max. Applied Voltage | 30V max. | |||
Output Voltage | - | H:Supply Voltage -1 V min. L:0.5 V max. |
H:2.5 V min. L:0.5 V max. |
|
Max. Freq. Response | 100 kHz | |||
Signal Rise/Fall Time (Pull-up resistor 2.2kΩ, 1m Cable) |
1μs max. | 0.1μs max. | ||
Insulation Resistance | 20MΩ min.(DC100V Megger) | |||
Output Impedance (Voltage Output only) |
- | 2.2kΩ | - | |
Cable Length | 500![]() |
|||
Outside Diameter | Փ5.1mm |
MECHANICAL | ||
Max. Speed of Shaft | 6000rpm | |
Moment of Inertia | 6 x 10ˉ⁷ kg叮² max | |
Starting Torque | 1.0 x 10ˉ³ N叮 max | |
Angular Acceleration | 10⁵rad/s² | |
Max.Shaft Loading |
Radial | 25N max. |
Axial | 15N max. | |
Weight | Approx. 120g (with 0.5m Cable) |
ENVIRONMENTAL | |
Operating Temperature | -10 - +70°C (Non-Freezing) |
Storage Temperature | -25 - +80°C (Non-Freezing) |
Operation Humidity | 35 - 95% (Non-Condensing) |
Vibration Resistance | 10 - 55Hz, Width (P-P) 1.5mm (2hours each in X,Y,Z Direction) |
Shock Resistance | 6ms, 980 m/s² (3times each in X,Y,Z Direction) |
Protection | Equivalent to IP50 |