cảm biến áp suất Pressure Sensor PCB 103B02 103B12
[1] Zero-based, least-squares, straight line method.
[2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Measurement Range | 3.00 psi | 180.3 dB | |
Useful Overrange | 6.00 psi | 186.3 dB | [2] |
Sensitivity (±15 %) | 1500 mV/psi | 217.5 mV/kPa | |
Maximum Pressure | 250 psi | 1724 kPa | |
Resolution | 0.02 mpsi | 77 dB | |
Resonant Frequency | ≥13 kHz | ≥13 kHz | |
Rise Time | ≤25 µ sec | ≤25 µ sec | |
Low Frequency Response (-5 %) | 5 Hz | 5 Hz | |
Non-Linearity | ≤2.0 % FS | ≤2.0 % FS | [1] |
ENVIRONMENTAL | |||
Acceleration Sensitivity | ≤0.0005 psi/g | ≤0.0035 kPa/(m/s²) | |
Temperature Range (Operating) | -100 to 250 °F | -73 to 121 °C | |
Temperature Coefficient of Sensitivity | ≤0.2 %/°F | ≤0.36 %/°C | |
Maximum Flash Temperature | 1000 °F | 538 °C | |
Maximum Shock | 1000 g pk | 9807 m/s² pk | |
ELECTRICAL | |||
Discharge Time Constant (at room temp) | 0.1 to 2.0 sec | 0.1 to 2.0 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 7 to 13 VDC | 7 to 13 VDC | |
PHYSICAL | |||
Sensing Element | Ceramic | Ceramic | |
Housing Material | Stainless Steel | Stainless Steel | |
Diaphragm | 316L Stainless Steel | 316L Stainless Steel | |
Sealing | Welded Hermetic | Welded Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Weight | 0.11 oz | 3.15 gm |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
060A10 | Clamp nut, 1/2-20-2A thd, 7/16" hex (for Model 103B01, 103B02, 103B11 and 103B12) | 1 |
065A66 | Adhesive mounting ring (for Series 103B) | 3 |
160-0242-00 | 3 |
(M) Metric Mount
ACCESSORIES: | |||
---|---|---|---|
Supplied | 060A24 | Clamp nut M14 x 1.25-6G thd 11 mm hex 17-4 SS material | 1 |