cảm biến áp suất Pressure Sensor PCB 103B11
[1] Zero-based, least-squares, straight line method.
[2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Measurement Range (± 5 V output) | 10 psi | 190.7 dB | |
Useful Overrange (± 10 V output) | 20 psi | 196.7 dB | [2] |
Sensitivity (±15 %) | 500 mV/psi | 72.5 mV/kPa | |
Maximum Pressure | 250 psi | 1724 kPa | |
Resolution | 0.06 mpsi | 86.3 dB | |
Resonant Frequency | ≥13 kHz | ≥13 kHz | |
Rise Time | ≤25 µ sec | ≤25 µ sec | |
Low Frequency Response (-5 %) | 5 Hz | 5 Hz | |
Non-Linearity | ≤2.0 % FS | ≤2.0 % FS | [1] |
ENVIRONMENTAL | |||
Acceleration Sensitivity | ≤0.0005 psi/g | ≤0.0035 kPa/(m/s²) | |
Temperature Range (Operating) | -100 to 250 °F | -73 to 121 °C | |
Temperature Coefficient of Sensitivity | ≤0.2 %/°F | ≤0.36 %/°C | |
Maximum Flash Temperature | 1000 °F | 538 °C | |
Maximum Shock | 1000 g pk | 9807 m/s² pk | |
ELECTRICAL | |||
Output Polarity (Positive Pressure) | Positive | Positive | |
Discharge Time Constant (at room temp) | 0.1 to 2.0 sec | 0.1 to 2.0 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 7 to 13 VDC | 7 to 13 VDC | |
PHYSICAL | |||
Sensing Element | Ceramic | Ceramic | |
Housing Material | Stainless Steel | Stainless Steel | |
Diaphragm | 316L Stainless Steel | 316L Stainless Steel | |
Sealing | Epoxy | Epoxy | |
Electrical Connector | Integral Cable | Integral Cable | |
Cable Termination | Pigtail Ends | Pigtail Ends | |
Weight | 0.115 oz | 3.260 gm | |
Cable Type | 32 AWG stranded wires | 32 AWG stranded wires | |
Cable Length | 15 in | 38.1 cm |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
070B09 | Solder connector adaptor (10-32 plug to solder terminal, straight pins for both terminals) | 1 |
061A04 | Sleeve clamp, 4-40 cap screw (for Models 103A & 103A11) | 2 |
065A66 | Adhesive mounting ring (for Series 103B) | 3 |
(M) Metric Mount
ACCESSORIES: | |||
---|---|---|---|
Supplied | M061A04 | Clamp | 2 |