Cảm biến gia tốc 356A32 | Accelerometer, ICP Triaxial PCB Piezotronics V
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | |
Measurement Range | ±50 g pk | ±491 m/s² pk | |
Frequency Range (±5 %) | 1.0 to 4000 Hz | 1.0 to 4000 Hz | |
Frequency Range (±10 %) | 0.7 to 5000 Hz | 0.7 to 5000 Hz | |
Resonant Frequency | ≥25 kHz | ≥25 kHz | |
Broadband Resolution (1) | 0.0003 g rms | 0.003 m/s² rms | [ 2] |
Non-Linearity | ≤1 % | ≤1 % | [ 1] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
ENVIRONMENTAL | |||
Overload Limit (Shock) | ±5000 g pk | ±49050 m/s² pk | |
Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [ 2] |
Base Strain Sensitivity | 0.001 g/µε | 0.01 (m/s²)/µε | [ 2] |
ELECTRICAL | |||
Excitation Voltage | 24 to 30 VDC | 24 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 7 to 16 VDC | 7 to 16 VDC | |
Discharge Time Constant | 0.4 to 1.5 sec | 0.4 to 1.5 sec | |
Settling Time (within 10% of bias) | <5 sec | <5 sec | |
Spectral Noise (1 Hz) | 95 µg/√Hz | 932 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (10 Hz) | 20 µg/√Hz | 196 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (100 Hz) | 6 µg/√Hz | 58.9 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (1 kHz) | 3 µg/√Hz | 29.4 (µm/sec2)/√Hz | [ 2] |
Spectral Noise (10 kHz) | 2 µg/√Hz | 19.6 (µm/sec2)/√Hz | [ 2] |
PHYSICAL | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Height | 0.45 in | 11.4 mm | |
Size - Length | 0.45 in | 11.4 mm | |
Size - Width | 0.45 in | 11.4 mm | |
Weight | 0.19 oz | 5.4 gm | [ 2] |
Electrical Connector | 8-36 4-Pin | 8-36 4-Pin | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 5-40 Female | 5-40 Female | |
Mounting Torque | 4 to 5 in-lb | 45 to 55 N-cm |
* All specifications are at room temperature unless otherwise specified
.
[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] See PCB Declaration of Conformance PS023 for details.
Supplied | ||
034K10 | 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) | 1 |
080A | Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish | 1 |
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
081A27 | Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu | 1 |
081A90 | Mounting stud, 10-32 to 5-40 | 1 |
ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
M081A27 | Metric mtg stud, 5-40 to M3 x 0.50 long | 1 |
( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
( TLA ) TEDS LMS International - Free Format
( TLB ) TEDS LMS International - Automotive Format
( TLC ) TEDS LMS International - Aeronautical Format
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.7 to 17.0 VDC | |
Weight | .23 oz | 6.4 gm |
Mounting | Adhesive |
( TLD ) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
ENGLISH | SI | |
---|---|---|
Output Bias Voltage | 7.7 to 17.0 | |
Weight | .23 | 6.4 |
Mounting | Adhesive |