Cảm biến gia tốc kèm cáp 3713F112G | Triaxial DC Response Accelerometer +Cable 037P10
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±3 %) | 675 mV/g | 68.8 mV/(m/s²) | [ 3] |
Measurement Range | ±2 g pk | ±19.6 m/s² pk | |
Frequency Range (±5 %) | 0 to 250 Hz | 0 to 250 Hz | |
Frequency Range (±10 %) | 0 to 350 Hz | 0 to 350 Hz | |
Resonant Frequency | 1.2 kHz | 1.2 kHz | [ 2] |
Phase Response (10 Hz) | <2.5 ° | <2.5 ° | |
Non-Linearity | ≤1 % | ≤1 % | [ 1] |
Broadband Resolution (0.5) | 0.1 mg rms | 0.001 m/s² rms | [ 2] |
Transverse Sensitivity | ≤3 % | ≤3 % | |
ENVIRONMENTAL | |||
Overload Limit (Shock) | ±3000 g pk | ±29420 m/s² pk | |
Temperature Range (Operating) | -65 to +250 °F | -54.0 to +121 °C | |
Temperature Range (Storage) | -65 to +250 °F | -54.0 to +121 °C | |
Temperature Coefficient of Sensitivity | ±2.5 % | ±2.5 % | [ 4] |
Zero g Offset Temperature Coefficient | ±1.5 % FSO | ±1.5 % FSO | [ 4] [ 5] |
Base Strain Sensitivity | 0.001 g/µε | 0.01 (m/s²)/µε | [ 2] |
Magnetic Sensitivity | 200 µg/gauss | 19.6 (m/s²)/Tesla | [ 2] |
ELECTRICAL | |||
Excitation Voltage | 5 to 32 VDC | 5 to 32 VDC | |
Current Consumption | ≤15 mA | ≤15 mA | |
Output Impedance | ≤120 Ohm | ≤120 Ohm | |
Offset Voltage | ±20 mVDC | ±20 mVDC | [ 6] |
Spectral Noise | 10 µg/√Hz | 98.1 (µm/sec2)/√Hz | [ 2] |
Electrical Isolation (Case) | >100000000 Ohm | >100000000 Ohm | |
PHYSICAL | |||
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Length | 0.8 in | 20.3 mm | |
Size - Width | 0.8 in | 20.3 mm | |
Size - Height | 0.8 in | 20.3 mm | |
Weight | 0.6 oz | 17.3 gm | |
Electrical Connector | 9-Pin | 9-Pin | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 10-32 Female | 10-32 Female |
* All specifications are at room temperature unless otherwise specified
.
[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Measured at 5 Hz, 0.5 grms.
[ 2] Typical.
[ 4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[ 5] FSO= Full Scale Output over the Measurement Range
[ 2] Typical.
[ 6] Offset tolerance is based on 10 ft of 037 test cable.
[ 7] See PCB Declaration of Conformance PS027 for details.
Supplied | ||
080A12 | Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish | 1 |
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
ACS-85T | Triaxial Phase and Magnitude Calibration form 0.5 Hz to 5% pt on linear scale | 1 |
M081B05 | Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu | 1 |