Cảm biến gia tốc Accelerometer M355B03 M355B04 PCB
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±10 %) | 100 mV/g | 10.19 mV/(m/s²) | |
Measurement Range | ±50 g pk | ±490 m/s² pk | |
Frequency Range (±5 %) | 1 to 10000 Hz | 1 to 10000 Hz | |
Frequency Range (±10 %) | 0.6 to 12000 Hz | 0.6 to 12000 Hz | |
Frequency Range (±3 dB) | 0.3 to 17000 Hz | 0.3 to 17000 Hz | |
Resonant Frequency | ≥35 kHz | ≥35 kHz | |
Broadband Resolution (1) | 0.0001 g rms | 0.0009 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | [3] |
ENVIRONMENTAL | |||
Overload Limit | ±5000 g pk | ±49000 m/s² pk | |
Temperature Range | -65 to +250 °F | -54 to +121 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
Base Strain Sensitivity | 0.05 g/µε | 0.49 (m/s²)/µε | [2] |
ELECTRICAL | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 7 to 13 VDC | 7 to 13 VDC | |
Discharge Time Constant | 0.5 to 2 sec | 0.5 to 2 sec | |
Spectral Noise (10 Hz) | 6 µg/√Hz | 59 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 2 µg/√Hz | 19 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 1 µg/√Hz | 10 (µm/sec2)/√Hz | [2] |
Electrical Isolation (Base) | >100000000 Ohm | >100000000 Ohm | |
PHYSICAL | |||
Size - Length | 0.95 in | 24.1 mm | |
Size - Width | 0.63 in | 16.0 mm | |
Weight | 0.35 oz | 10 gm | [2] |
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side | |
Mounting | Through Hole | Through Hole |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
039A22 | Allen wrench, 7/64" hex head (for use with 6-32 thd cap screws) | 1 |
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
081B45 | Off ground socket head cap screw assembly, 6-32 UNC-2A thd., 0.63 length, stainless steel. | 1 |
ACS-1 | Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable | 1 |
(A) Adhesive Mount
ACCESSORIES: | |||
---|---|---|---|
Supplied | 080A90 | Quick Bonding Gel | 1 |
(M) Metric Mount
ACCESSORIES: | |||
---|---|---|---|
Supplied | M081B45 | Accessory for Vibration Division Product | 1 |
Supplied | M039A22 | Allen wrench for use with M3 thread | 1 |
(W) Water Resistant Cable
ENGLISH | SI | |
---|---|---|
Electrical Connection Position | Side |