Cảm biến gia tốc cảm biến rung 339B31 | Triaxial ICP Accelerometer

Cảm biến gia tốc  cảm biến rung 339B31 | Triaxial ICP Accelerometer

Cảm biến gia tốc cảm biến rung 339B31 | Triaxial ICP Accelerometer

UHT-12™ Traixial ICP accel, 10-32 stud mount, 10 mV/g, LTC w/built-in filter >14 kHz.

Electrical Filter Corner Frequency: >14 kHz

Sensitivity: (±10%)10 mV/g ( 1.02 mV/(m/s²))

Measurement Range: 500 g pk ( 4905 m/s² pk)

Frequency Range: (+/-10%)1.5 to 11000 Hz ( 1.5 to 11000 Hz)

Electrical Connector: 1/4-28 4-Pin ( 1/4-28 4-Pin)
  • 339B31
  • Liên hệ
  • 1450
  • Thông tin sản phẩm
  • Bình luận
ENGLISH: SI:  
PERFORMANCE
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)  
Measurement Range 500 g pk 4905 m/s² pk  
Frequency Range (+/-5 %) 2 to 8000 Hz 2 to 8000 Hz  
Frequency Range (+/-10 %) 1.5 to 11000 Hz 1.5 to 11000 Hz  
Resonant Frequency ≥50 kHz ≥50 kHz  
Filter Type (single pole) Low Pass Low Pass  
Electrical Filter Roll-off 6 dB/octave 6 dB/octave  
Electrical Filter Corner Frequency >14 kHz >14 kHz  
Broadband Resolution .008 g rms .078 m/s² rms [ 1]
Non-Linearity ≤0.5 % ≤0.5 %  
Transverse Sensitivity ≤5 % ≤5 %  
ENVIRONMENTAL
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk  
Temperature Range -65 to +356 °F -54 to +180 °C  
Temperature Response See Graph %/°F See Graph %/°F [ 1]
Temperature Coefficient of Sensitivity .012 %/°F .022 %/°C [ 1]
ELECTRICAL
Excitation Voltage 18 to 30 VDC 18 to 30 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance ≤400 Ohm ≤400 Ohm  
Output Bias Voltage 9 to 14 VDC 9 to 14 VDC  
Discharge Time Constant .3 to 2 sec .3 to 2 sec  
Settling Time (within 10% of bias) <3 sec <3 sec  
Spectral Noise (1 Hz) 4800 µg/√Hz 47088 (µm/sec2)/√Hz [ 1]
Spectral Noise (10 Hz) 560 µg/√Hz 5494 (µm/sec2)/√Hz [ 1]
Spectral Noise (100 Hz) 150 µg/√Hz 1472 (µm/sec2)/√Hz [ 1]
Spectral Noise (1 kHz) 60 µg/√Hz 589 (µm/sec2)/√Hz [ 1]
PHYSICAL
Sensing Element UHT-12™ UHT-12™  
Sensing Geometry Shear Shear  
Housing Material Titanium Titanium  
Sealing Hermetic Hermetic  
Size - Height .4 in 10.2 mm  
Size - Length .4 in 10.2 mm  
Size - Width .4 in 10.2 mm  
Weight .15 oz 4.2 gm [ 1]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin  
Electrical Connection Position Side Side  
Mounting Stud Stud  
Mounting Thread 10-32 Female 10-32 Female  

* All specifications are at room temperature unless otherwise specified

.


 


 

Specification Notes


[ 1] Typical.
[ 2] See PCB Declaration of Conformance PS023 for details.


 

Accessories


     
Supplied
010S10 4-cond, shielded cable, FEP jacket, 10-ft, 1/4-28 4-socket plug for 200C to triple splice assembly with (3) 1-ft coaxial cables each with a BNC plug (AC connector) 1
080A Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
ACS-44T Extended Frequency Response Calibration to +10% point on a triax accel, (requires ACS-1T) 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1
Sản phẩm cùng loại