Cảm biến gia tốc cảm biến rung 603C11 | Low-cost Industrial ICP Accelerometer

Cảm biến gia tốc cảm biến rung 603C11 | Low-cost Industrial ICP Accelerometer

Cảm biến gia tốc cảm biến rung 603C11 | Low-cost Industrial ICP Accelerometer

General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

Sensitivity: (±10%)100 mV/g ( 10.2 mV/(m/s²))

Frequency Range: (±3dB)30 to 600000 cpm ( 0.5 to 10000 Hz)

Sensing Element: Ceramic

Measurement Range: ±50 g ( ±490 m/s²)

Weight: 1.8 oz ( 51 gm)
  • 603C11 PCB
  • Liên hệ
  • 1131
  • Thông tin sản phẩm
  • Bình luận
ENGLISH: SI:  
PERFORMANCE
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [ 1]
Measurement Range ±50 g ±490 m/s²  
Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [ 3]
Resonant Frequency 1500 kcpm 25 kHz [ 4]
Broadband Resolution (1) 350 µg 3434 µm/sec2 [ 4]
Non-Linearity ±1 % ±1 % [ 2]
Transverse Sensitivity ≤7 % ≤7 %  
ENVIRONMENTAL
Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
Temperature Range -65 to +250 °F -54 to +121 °C  
Temperature Response See Graph %/°F See Graph %/°F [ 4]
Enclosure Rating IP68 IP68  
ELECTRICAL
Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
Discharge Time Constant ≥0.3 sec ≥0.3 sec  
Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance <150 Ohm <150 Ohm  
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [ 4]
Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [ 4]
Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [ 4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
PHYSICAL
Size - Hex 11/16 in 18 mm  
Size - Height 4.7 in 119 mm  
Weight (without cable) 1.8 oz 51 gm  
Mounting Thread 1/4-28 Female 1/4-28 Female [ 6]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
Sensing Element Ceramic Ceramic  
Sensing Geometry Shear Shear  
Housing Material Stainless Steel Stainless Steel  
Sealing Welded Hermetic Welded Hermetic  
Electrical Connector Molded Integral Cable Molded Integral Cable  
Electrical Connection Position Top Top  
Cable Length 10 ft 3.0 m  
Cable Type Polyurethane Polyurethane [ 5]

* All specifications are at room temperature unless otherwise specified

.


 


 

Specification Notes


[ 1] Conversion Factor 1g = 9.81 m/s².
[ 2] Zero-based, least-squares, straight line method.
[ 3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[ 4] Typical.
[ 5] Twisted shielded pair.
[ 6] 1/4-28 has no equivalent in S.I. units.
[ 7] See PCB Declaration of Conformance PS023 or PS060 for details.


 

Accessories


     
Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1


 

Optional Versions


( EX ) Hazardous Area Approval- contact factory for specific approvals

  ENGLISH SI
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Sản phẩm cùng loại