Cảm biến khoảng cách xa SICK Dx100 / DL100 Pro Type: DL100-21AA2103 Part no.: 1052688
Type: DL100-21AA2103 Part no.: 1052688
Mechanics/electronics
Supply voltage Vs DC 18 V ... 30 V, limit values
Ripple 5 Vpp 1)
Initialization time Typ. 1.5 s 2)
Housing material Metal (Aluminum die cast)
Window material Plastic (PMMA)
Connection type Male connector, M12, SPEEDCON™ compatible
Indication 6 digit 5 x 7 dot matrix display, LEDs
Weight Approx. 800 g (with mounting bracket: approx. 1,600 g)
Current consumption At 24 V DC < 250 mA
Dimensions (W x H x D) 69.4 mm x 82.5 mm x 100.2 mm
Modulation frequency Fix
Enclosure rating IP65
Protection class III
1) May not fall short of or exceed VS tolerances.
2) After loss of reflector < 40 ms.
Performance
Measuring range 0.15 m ... 100 m, on “diamond grade” reflective tape
Target Reflector
Resolution 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
Repeatability 0.5 mm 1)
Accuracy ± 2 mm 2)
Response time 2 ms
Measurement cycle time 1 ms
Output time 1 ms
Light source Laser, red 3)
visible red light
Laser class 2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014)
Typ. light spot size (distance) 5 mm + (2 mm x distance in m)
Max. movement speed 15 m/s
Acceleration (max.) ≤ 15 m/s²
1) Statistical error 1 σ, environmental conditions constant, min. warm-up time 10 min.
2) From 150 mm ... 180 mm measuring range the accuracy can reach ± 4 mm.
3) Average service life: 100,000 h at TU = +25 °C.
Interfaces
Serial ✔ , RS-422
Digital output
Number 2 1)
Type Push-pull: PNP/NPN
Function Distance: Distance switching output
Speed; Speed output
Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on
Laser off
Preset
Maximum output current IA ≤ 100 mA 2)
Multifunctional input (MF) 1 x MF1 3)
1) HIGH = > VS - 3 V / LOW = < 2 V.
2) Max. 100 nF/20 mH.
3) HIGH > 12 V / LOW < 3 V.
Ambient data
Electromagnetic compatibility (EMC) EN 61000-6-2, EN 61000-6-4 1)
Ambient temperature, operation
–20 °C ... +55 °C 2)
–20 °C ... +75 °C, operation with cooling case 2)
Ambient temperature, storage –40 °C ... +75 °C
Effect of air pressure 0.3 ppm/hPa
Effect of air temperature 1 ppm/K
Temperature drift Typ. 0.1 mm/K
Typ. Ambient light immunity ≤ 100,000 lx
Mechanical load
Shock: (EN 600 68-2-27)
Sine: (EN 600 68-2-6)
Noise: (EN 600 68-2-64)