Cảm biến lực Force Sensor 201B01 201B02 201B03 201B04 201B05 PCB
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±15 %) | 500 mV/lb | 112405 mV/kN | |
Measurement Range (Compression) | 10 lb | 0.0445 kN | |
Maximum Static Force (Compression) | 60 lb | 0.267 kN | |
Broadband Resolution (1) | 0.0002 lb-rms | 0.0008896 N-rms | [2] |
Low Frequency Response (-5 %) | 0.01 Hz | 0.01 Hz | [3] |
Upper Frequency Limit | 90000 Hz | 90000 Hz | [4] |
Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
ENVIRONMENTAL | |||
Temperature Range | -65 to +250 °F | -54 to +121 °C | |
Temperature Coefficient of Sensitivity | ≤0.03 %/°F | ≤0.054 %/°C | |
ELECTRICAL | |||
Discharge Time Constant (at room temp) | ≥50 sec | ≥50 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Output Polarity (Compression) | Positive | Positive | |
PHYSICAL | |||
Preload | 60 lb | 0.267 kN | |
Stiffness | 12 lb/µin | 2.1 kN/µm | [2] |
Size - Diameter | 0.650 in | 16.5 mm | |
Size - Height | 0.310 in | 7.9 mm | |
Size - Bolt Diameter | 0.25 in | 6 mm | |
Size - ID (Hole Diameter) | 0.251 in | 6.38 mm | |
Size - OD (Sensor) | 0.650 in | 16.51 mm | |
Size - Sensing Surface | 0.50 in | 12.7 mm | |
Weight | 0.35 oz | 10 gm | |
Housing Material | Stainless Steel | Stainless Steel | |
Sealing | Hermetic | Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
080A82 | Assembly lubricant (for Series 201-207 force rings) | 1 |
081A11 | Mounting stud, 10-32 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76 | 1 |
082B01 | Anti-friction washer for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B | 1 |
083B01 | Pilot bushing for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B | 1 |
M081A11 | Mounting stud, M5x0.8 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76 | 1 |
M083B01 | Pilot bushing for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B | 1 |
(W) Water Resistant Cable
ENGLISH | SI | |
---|---|---|
Electrical Connector | Sealed Cable | |
Electrical Connection Position | Side |