Cảm biến lực Force Sensor 202B M202B PCB
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
ENGLISH: | SI: | ||
---|---|---|---|
PERFORMANCE | |||
Sensitivity (±15 %) | 0.50 mV/lb | 112.4 mV/kN | |
Measurement Range (Compression) | 10000 lb | 44.48 kN | |
Maximum Static Force (Compression) | 15000 lb | 66.72 kN | |
Broadband Resolution (1) | 0.20 lb-rms | 0.890 N-rms | [2] |
Low Frequency Response (-5 %) | 0.0003 Hz | 0.0003 Hz | [3] |
Upper Frequency Limit | 60000 Hz | 60000 Hz | [4] |
Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
ENVIRONMENTAL | |||
Temperature Range | -65 to +250 °F | -54 to +121 °C | |
Temperature Coefficient of Sensitivity | ≤0.03 %/°F | ≤0.054 %/°C | |
ELECTRICAL | |||
Discharge Time Constant (at room temp) | ≥2000 sec | ≥2000 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Output Polarity (Compression) | Positive | Positive | |
PHYSICAL | |||
Preload | 2000 lb | 8.896 kN | |
Stiffness | 16 lb/µin | 2.8 kN/µm | [2] |
Size - Diameter | 0.870 in | 22.1 mm | |
Size - Height | 0.390 in | 9.91 mm | |
Size - Bolt Diameter | 0.375 in | 10 mm | |
Size - ID (Hole Diameter) | 0.413 in | 10.49 mm | |
Size - OD (Sensor) | 0.870 in | 22.10 mm | |
Size - Sensing Surface | 0.665 in | 16.89 mm | |
Weight | 0.67 oz | 19 gm | |
Housing Material | Stainless Steel | Stainless Steel | |
Sealing | Hermetic | Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side |
* All specifications are at room temperature unless otherwise specified.
Supplied | ||
080A82 | Assembly lubricant (for Series 201-207 force rings) | 1 |
081A12 | Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B | 1 |
082B02 | Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 | 1 |
083B02 | Pilot bushing for Models 202B & 212B | 1 |
(M) Metric Mount
ACCESSORIES: | |||
---|---|---|---|
Supplied | M083B02 | Pilot Bushing | 1 |
Supplied | M081A12 | Mounting Stud, M8 x 1.00, BeCu | 1 |
(W) Water Resistant Cable
ENGLISH | SI | |
---|---|---|
Electrical Connector | Sealed Cable | |
Electrical Connection Position | Side |