Cảm biến lực Force Sensor 208A12 208A13 208A14 208A15 PCB

Cảm biến lực Force Sensor 208A12 208A13 208A14 208A15 PCB

Cảm biến lực Force Sensor 208A12 208A13 208A14 208A15 PCB

CE

Multi-purpose ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb, axial conn.

Measurement Range: 100 lb (0.4448 kN)

Sensitivity: (±15%)50 mV/lb (11240 mV/kN)

Low Frequency Response: (-5%)0.001 Hz

Upper Frequency Limit: 36000 Hz

Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • 208A12
  • Liên hệ
  • 700
  • Thông tin sản phẩm
  • Bình luận

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

  ENGLISH: SI:  
PERFORMANCE
Sensitivity (±15 %) 50 mV/lb 11240 mV/kN  
Measurement Range (Compression) 100 lb 0.4448 kN  
Measurement Range (Tension) 100 lb 0.4448 kN  
Maximum Static Force (Compression) 600 lb 2.669 kN  
Maximum Static Force (Tension) 500 lb 2.224 kN  
Broadband Resolution (1) 0.001 lb-rms 0.004448 N-rms [2]
Low Frequency Response (-5 %) 0.001 Hz 0.001 Hz [3]
Upper Frequency Limit 36000 Hz 36000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
ENVIRONMENTAL
Temperature Range -65 to +250 °F -54 to +121 °C  
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C  
ELECTRICAL
Discharge Time Constant (at room temp) ≥500 sec ≥500 sec  
Excitation Voltage 20 to 30 VDC 20 to 30 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance ≤100 Ohm ≤100 Ohm  
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC  
Output Polarity (Compression) Positive Positive  
PHYSICAL
Stiffness 6 lb/µin 1.05 kN/µm [2]
Size - Hex 0.625 in 15.88 mm  
Size - Height 1.17 in 29.7 mm  
Weight 0.80 oz 22.7 gm  
Housing Material Stainless Steel Stainless Steel  
Sealing Epoxy Epoxy  
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack  
Electrical Connection Position Axial Axial  

* All specifications are at room temperature unless otherwise specified.

Accessories


 

     
Supplied
080A81 Thread lock adhesive (for Series 200) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
084A03 Impact cap, convex (for Series 208) 1
M081A62 Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu 1

Optional Versions


(W) Water Resistant Cable

  ENGLISH SI
Electrical Connector Sealed Cable
Sản phẩm cùng loại