MHMD082G1C | Panasonics MINAS A5 Family Servo Motor

MHMD082G1C | Panasonics MINAS A5 Family Servo Motor

MHMD082G1C | Panasonics MINAS A5 Family Servo Motor

10 W to 7.5 kW, Input power supply for Driver: Voltage DC 24 V/48 V・AC 100 V/200 V/400 V, 20 bit incremental・17 bit Absolute/Incremental encoder, Frequency response 2.3 kHz
  • MHMD082G1C
  • Liên hệ
  • 453
  • Thông tin sản phẩm
  • Bình luận
Item Specifications
Part Number MHMD082G1C
Details High inertia, Lead wire type, IP65
Family Name MINAS A5
Series MHMD Series
Type High inertia
Protection class IP65
About Enclosure Except rotating portion of output shaft and leadwire end.
Environmental Conditions For more details, please refer to the instruction manual.
Flange sq. dimension 80 mm sq.
Flange sq. dimension (Unit:mm) 80
Motor lead-out configuration Lead wire
Motor encoder connector Lead wire
Power supply capacity (kVA) 1.3
Voltage specifications 200 V
Rated output 750 W
Rated current (A (rms)) 4.0
Holding brake without
Mass (kg) 2.5
Oil seal with
Shaft Round
Rated torque (N ⋅ m) 2.4
Momentary Max. peak torque (N ⋅ m) 7.1
Max. current (A (o-p)) 17.0
Regenerative brake frequency (times/min) Without option :No limit
With option :No limit
Option (External regenerative resistor) Part No. : DV0P4283
About regenerative brake frequency Please refer to the details of [Motor Specification Description] , Note: 1, and 2.
Rated rotational speed (r/min) 3000
Rated rotational Max. speed (r/min) 4500
Moment of inertia of rotor ( x10-4 kg ⋅ m²) 1.51
Recommended moment of inertia ratio of the load and the rotor 20 times or less
About recommended moment of inertia ratio of the load and the rotor Please refer to the details of [Motor Specification Description] ,Note: 3.
Rotary encoder: specifications 20-bit Incremental system
Rotary encoder: Resolution 1048576

 

Permissible load

Item Specifications
During assembly: Radial load P-direction (N) 686
During assembly: Thrust load A-direction (N) 294
During assembly: Thrust load B-direction (N) 392
During operation: Radial load P-direction (N) 392
During operation: Thrust load A, B-direction (N) 147
About permissible load For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft".
Sản phẩm cùng loại