Thiết bị hiệu chuẩn Dynalco Signal Frequency Generator-Counter-Calibrator - F-16

0944911836 Ms. Duyên 0972835740 Ms. Hà 0385097045 Mr. Hiếu 0392468875 Ms. Anh 0707602728 Ms. Vân
Thiết bị hiệu chuẩn Dynalco Signal Frequency Generator-Counter-Calibrator - F-16

Thiết bị hiệu chuẩn Dynalco Signal Frequency Generator-Counter-Calibrator - F-16

The Dynalco Signal Frequency Generator/Counter/Calibrator F-16 is an instrument that measures signal frequency from magnetic pickups, pulsers, ac generators, shaft encoders. This frequency generator/counter is used to calibrate tachometers, digital speed indicators, governors, counters and frequency meters. Eliminates the need for a frequency counter or an audio generator.

PRODUCT FEATURES:

Generates a continuously adjustable signal from 10 Hz to 20,000 Hz.

Displays the generated frequency with 0.1 Hz resolution up to 999.9 Hz; 1 Hz resolution from 1000 Hz to 20,000 Hz. Automatic scale ranging of the readout.

Measures an external frequency signal with the same accuracy and autoranging.

Portable, lightweight, battery-operated, low current consumption.

Fast update rate of one reading per second (one second gate time) in both ranges.

High level output of 10 volts peak-topeak. Permits calibration of Dynalco's self-powered tachometers, trips, etc.

Crystal-controlled accuracy of readout.

Rugged, extruded aluminum case.

Frequency Adjustment: Ten-turn coarse and fine potentiometers permit continuous, precise frequency control from 10 Hz to 20,000 Hz.

Generator/Counter Switch: Programs the instrument as a signal generator (transmitter) or as a counter (receiver).

Power Switch: Turns instrument on and off.

PRODUCT SPECIFICATIONS:

Dynalco Part No.: F-16

Display: 5 digits, 0.4" high LCD, high contrast ratio in high ambient light. Frequency is displayed in both the generator and the counter mode of operation. Frequency in 0.1 Hz increments from 10.0 to 999.9 Hz; in 1 Hz increments from 1000 to 20,000 Hz. Automatic scale ranging. Display updating rate of one second in both ranges. Crystal controlled gate time.

Generated Signal: In the generator mode (Generator/Counter switch set to Generator) the output signal frequency can be varied continuously from 10.0 Hz to 20,000 Hz by means of two potentiometers: one for coarse control and one for fine control. Output is a square wave, DC-coupled, nominal amplitude of 10 volts peak-to-peak, short-circuit proof.

Signal Sensitivity: When used as a counter (Generator/Counter switch set to Counter), the instrument operates with any signal amplitude from 50 mVrms to 50 Vrms. It is insensitive to signal amplitude and responds exclusively to frequency. Signal waveform can be sinusoidal, square, triangular, or pulse, and can be unipolar or bipolar since the input amplifier is ac coupled.

Power: Single 9-volt radio battery of the following types: Eveready 1222, Mallory M1604HD2, or Ray-O-Vac D1604.

Battery Replacement: A snap-open door in the rear panel gives access for battery replacement.

Low Battery Indication: Appearance of a colon after the first and second digits and a decimal point after the third digit, indicates

a discharged battery.

Environment Temperature Range: 0°F to +150°F (–17.7°C to +65.6°C), operating; –40°F to +150°F (–40°C to +65.6°C), storage.

Weight: 1.0 lb maximum (0.45 kg).
  • Dynalco F-16
  • Liên hệ
  • 905
  • Thông tin sản phẩm
  • Bình luận
Sản phẩm cùng loại