Cảm biến áp suất 113B28 | ICP Pressure Sensor PCB

Cảm biến áp suất 113B28 | ICP Pressure Sensor  PCB

Cảm biến áp suất 113B28 | ICP Pressure Sensor PCB

Platinum Stock Products;High frequency ICP® pressure sensor, 50 psi, 100 mV/psi, 0.218" dia. diaphragm, accel. comp.

Measurement Range: 50 psi ( 344.7 kPa)

Sensitivity: (±15%)100 mV/psi ( 14.5 mV/kPa)

Low Frequency Response: (-5%)0.5 Hz

Resonant Frequency: >=500 kHz ( >=500 kHz)

Electrical Connector: 10-32 Coaxial Jack

Weight: 0.16 oz ( 4.5 gm)
  • 113B28 PCB
  • Liên hệ
  • 1008
  • Thông tin sản phẩm
  • Bình luận
ENGLISH: SI:  
PERFORMANCE
Measurement Range (for ±5V output) 50 psi 344.7 kPa  
Useful Overrange (for ± 10V output) 100 psi 689.4 kPa [ 3]
Sensitivity (±15 %) 100 mV/psi 14.5 mV/kPa  
Maximum Pressure 1000 psi 6895 kPa  
Resolution 0.001 psi 0.007 kPa [ 2]
Resonant Frequency ≥500 kHz ≥500 kHz  
Rise Time ≤1.0 µ sec ≤1.0 µ sec  
Low Frequency Response (-5 %) 0.5 Hz 0.5 Hz  
Non-Linearity ≤1.0 % FS ≤1.0 % FS [ 1]
ENVIRONMENTAL
Acceleration Sensitivity ≤0.002 psi/g ≤0.0014 kPa/(m/s²)  
Temperature Range (Operating) -100 to +275 °F -73 to +135 °C  
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C  
Maximum Flash Temperature 3000 °F 1649 °C  
Maximum Vibration 2000 g pk 19614 m/s² pk  
Maximum Shock 20000 g pk 196140 m/s² pk  
ELECTRICAL
Discharge Time Constant (at room temp) ≥1.0 sec ≥1.0 sec  
Excitation Voltage 22 to 30 VDC 22 to 30 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance <100 Ohm <100 Ohm  
Output Bias Voltage 8 to 15 VDC 8 to 15 VDC  
PHYSICAL
Sensing Geometry Compression Compression  
Sensing Element Quartz Quartz  
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel  
Diaphragm Invar Invar  
Sealing Welded Hermetic Welded Hermetic  
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack  
Weight (with clamp nut) 0.16 oz 4.5 gm  

* All specifications are at room temperature unless otherwise specified

.




 

Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[ 4] See PCB Declaration of Conformance PS023 for details.


 

Accessories


     
Supplied
060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113) 1
060A05 Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113) 1
065A05 Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A) 1
065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A) 3
Sản phẩm cùng loại